Remote SX200 access with IPocket 232

[exnewbridge]

Can anyone help me with a remote access question? I'm trying to connect to an SX200 ICP via the maint port using a Precidia IPocket232. When I attempt to Telnet in, I only get the Precidia, it is not allowing me to access the PBX, Any thoughts?
Thanks

 

[kwbMitel]

Why would you not use the Web Based (IE)programming direct to the controller's address or use the secure telnet program provided by Mitel?



*******************************************************
The secret to success is knowing who to blame for your failures.

 

[exnewbridge]

Sorry, this is an older switch, it's an EL LW17, no controller. Currently there is remote access via a modem and would like to replace that dial up with the IPpocket232.

 

[jazwinner]

The Precidia IPocket232 needs to be configured (like all terminal/port servers - I prefer the one made by Digi). Generally you connect on Telnet (port 23) for maintenance, and to another port (such as 2001 or 2101 as default on the Digis) for which port you are using to do the RS232 pass thru.