Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Remote Programing
- Thread starter silver987
- Start date
- Thread starter
- #2
curlycord
Programmer
Its the same as if you were onsite when programming from telset.
Try the Browser tool too...you never know.
In case the other sets do not have F9 keys of have direct lines then copy the said set to your RAD set, program the F9 key with F*3 then copy the RAD set back to the said set.
________________________________________
We take the time to try to answer your questions for free, please return the favor and take the time to answer back and include any resolution you found elsewhere, thanks.
=----(((((((((()----=
Toronto Canada
Try the Browser tool too...you never know.
In case the other sets do not have F9 keys of have direct lines then copy the said set to your RAD set, program the F9 key with F*3 then copy the RAD set back to the said set.
________________________________________
We take the time to try to answer your questions for free, please return the favor and take the time to answer back and include any resolution you found elsewhere, thanks.
=----(((((((((()----=
Toronto Canada
- Status
Similar threads
