Remote office RLC to 9115 connection

[bdabson]

Hi,

I'm trying to setup a lab based system to test the Remote Gateway 9115 units (NTDR91)before deploying.

I can easily test the IP config is all working, but I want to test the ISDN/POTS backup line.

I have a UILC (NT6D71) to provide the 2 wire ISDN connection to the 9115 but I can't get it working.

Can anyone offer any suggestions to help set this up.
Am I even using the right equipment? ISDN is not my strongpoint.

Any help would be greatly appreciated.

thanks in advance.

 

[Reusser]

The Pots line on the 9115 is a standard 1mb not a bri/isdn line.

The 9150 allows for BRI/ISDN.

 

[bdabson]

Hi Reusser

When you say a 1mb line do you mean ADSL or ISDN?
Sorry if this seems a dumb question but it's starting to get on my nerves as I can't get it going

I appreciate your help

 

[KCFLHRC]

Hey means POTS LINE, Plain Old Telephone Service, regular old dial tone.