Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Remote Office Altigen 710 setup integrating w/Main Site

Status
Not open for further replies.

gflinders

Technical User
Jun 30, 2006
1
US
Getting ready to attempt setting up a remote site using Altigen 710 phones. I have everything ready just trying to figure out where exactly to start?

Any info would be helpful.

- Server Setup for Remote Access
- Setting up Gatekeeper
- 710 phone settings for Remote Access
_ etc.

Any help would be appreciated.

 
1. Need to configure AltiServ behind NAT.
2. Need configure your NAT to forward port to IP Phone.
3. Only one IP phone can be supported behind a NAT.
4. You don't need gatekeeper.

If you are using AltiWare 5.1 version (SIP based firmware), you only need to configure AltiServ behind NAT. Also, you can put mulitple IP phone behind a NAT.
=====================================
If you have a VPN router connect to your company, then you don't have to configure anything.

AltiGen Engineer.

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top