Remote LIM over IP

[MATOVTZ]

How work with RAD's IPmux? Is there any solution except RAD IPmux?
matovtz

 

[SYAR2003]

Ericsson's MSED ( hl-950 ) ,
software for dynamic bandwidh is beeing tested now .

I've just tested it with fixed bandwith software
so far it looks very good .

 

[MATOVTZ]

Where I get more information about Ericsson's MSED?
Solution with IPmux I received from Local /// company. Syar, can you send any document?

 

[whosrdaddy]

we have lots of remote lim installations on RAD with no problems whatsoever

http://www.damovo.com

 

[lalrl]

Do you have remote-lims without external lines too? It is because of clocking - should always be set local. So you need externally lines in every remote-lim. Other experiences?

 

[helpasapplease]

Can someone help with problems connecting a LIM over IP (via RAD Vmux). The remote LIM has no external PSTN connections. The RAD will compress the voice and run over as TDM over IP. Having problems with Yellow Alarms and slips. LIM down and Switch going into Night Service.

 

[lalrl]

Typical errors! Thats what I told you before. Order a BRI, set local scexi for this lim and you will solve your problems

 

[TripleT]

Make sure you have the clocking set correctly in the RAD Muxes. Loopback in the RADMux at the Groups Switch End and Adaptive at the Remote Lim End.

You may also have to adjust your Jitter Buffer Depth. Because the RADMux uses the Jitter Buffer in Adaptive Clocking the Smaller the Jitter Buffer the more Likely you are to get Slips.

Look at the Stats in the Remote RadMux and it will tell you what the maximum Jitter Buffer Variation for the Period.

Suggest at least 10ms.