The Visual Basic 6 project I am working on has several user controls. These controls are compiled into an .exe that runs quite well on all user pc's except when trying to run the application on a pc you're connected to via Remote Desktop Connection. The error is:
"Error 372: Failed to load control 'our user control name' from . Your version of may be outdated. Make sure you are using the version of the control that was provided with the application."
*NOTE the blanks after 'from' and 'of' in the first two sentences...
I have scanned the newsgroups for those with similar problems, but most people encounter this problem when they are working with compiled ocxs or imagelists. I don't know why I am even getting this error since the user control listed in the error message is not even used in the application.
Any help would be greatly appreciated.
Thanks.
"Error 372: Failed to load control 'our user control name' from . Your version of may be outdated. Make sure you are using the version of the control that was provided with the application."
*NOTE the blanks after 'from' and 'of' in the first two sentences...
I have scanned the newsgroups for those with similar problems, but most people encounter this problem when they are working with compiled ocxs or imagelists. I don't know why I am even getting this error since the user control listed in the error message is not even used in the application.
Any help would be greatly appreciated.
Thanks.