Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Remote Cordless Phone

Status
Not open for further replies.

OldSchool70

Technical User
Feb 25, 2015
218
US
Any recommendations for a Remote CORDLESS IP Phone?
 
Might be best with a standard analogue cordless phone connected to something like a Cisco SPA112, which will connect to the PBX as a SIP device and then allows any analogue phone connected to work on an IP system.

| ACSS SME |
 
WIFI phones are horrible
much better with a DECT solution.



Do things on the cheap & it will cost you dear
 
Thanks for the suggestions. However, I thought only the Avaya 9600 Series phones and the E and J Series phones could be connected remotely.
 
The Cisco ATA can be connected remotely, you just need to configure the system to accept remote SIP extensions, amend the remote SIP port for TCP or UDP (depending on how you setup the ATA) and then configure the ATA to connect to the public IP address of the firewall that has a NAT rule to route the traffic on the amended SIP port to the IPO. I know this works as I have it working for a customer who wanted to retain their wireless conference phone.

| ACSS SME |
 
Gigaset DECT SIP are cheap and reliable.
But a VPN is always mandatory for save connections.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top