Remote Client 8.4 to 5GT possible NAT-T issue

[ParkCity]

Here is the setup. (I didnt create it)

Home network at 192.168.1.x/24 using Remote Client connecting to DSL router providing NAT/DHCP to the internal network and a public, dynamic ip on the external side. This needs to connect to a Netscreen 5GT with public, static ip on the untrust side and acting as DHCP server on the internal network doing NAT but using the SAME 192.168.1.x/24 address space!! Is there ANY way I can create a policy for the Remote Client that will prevent me from changing the address space at either location? Could I use the Safenet Virtual Adapter here (provided on the Remote Client) give it an address (10.0.0.1) and create an untrusted address on the 5GT of 10.0.0.1. Time is critical on this...Any ideas? Thanks ParkCity

 

[Njetscreamer]

Holy schmoly, you got a lot of responses on this,

I think i have a suitable solution for you if you haven't allready changed your subnets.

Have a look at the following PDF,
should sort you out.

http://services.netscreen.com/docs/vpn/vpn301-001.pdf

Kind regards

Njetscreamer