Remote access

[ibceptor]

Is it difficult to install a remote access (RAID)? on a Norstar?

 

[MarvO1]

Not at all. Just punch down RAD to any unused station port and connect power and program it.

MarvO said it

 

[HUCHIMAMA]

feature 9** is for rad programming. I believe the password is "radadmin" . you could also go into port and dn status and make sure the ksu sees the rad. good luck

kgrant

 

[ibceptor]

What programming has to be done, on the Irad itself or the system to talk to it?

 

[MarvO1]

If you are talking IRAD instead of RAD, the IRAD is internal to the CICS only and is enabled by a keycode unless your software cart. says w/IRAD.
Then, all you have to do is set a password for it. The default password is the system ID.

For an external RAD, you still need to set up a password.

MarvO said it

 

[GrumSFC]

Are you in the US or UK? I'm currently doing a lot of research for my company about the RAD. It sounds like i may have got a bit further though.
I have lots of documentation and software i would be happy to share if you want.

Email me and i'll be happy to help.

graham.b@ashtelecom.co.uk