Remote access

[joehawkins]

Hi

Can anyone explain remote access on the Ipldk Nexer please?

Thanks in advance

Joe

 

[doktor]

Remote access can be done to the ipLDK-24's internal ISDN2 (BRI) modem or the analogue modem, if installed.
Also you can install an ADSL and connect to the ipLDK-24 throgh a router.
Onsite you just use your laptop and connect throgh your browser to the ip address of the ipLDK-24 (Nexer).
An userID and password is required to connect to the Nexer.
So, for this product no special program is required to connect to the Nexer.
///doktor

 

[joehawkins]

Can you explain the nexer remote working on anlogue lines please?

Thanks

Joe

 

[doktor]

The Nexer should be in H/W revision 3.0. (S/W 3.0 to 3.7).
An analogue modem can be added inside the PBX near slot 1.
This modem is a small PCB (1cm by 2cm).
///doktor

 

[joehawkins]

Hi Doktor

Thanks for that, what is the procedure for connecting remotely from my pc, what if any software will i need?

Thanks again

Joe

 

[doktor]

You just need the Internet Explorer!
Dial-up through your XP PC to the LDK-24 and use the Internet Explorer to logon after the ISDN line is connected. So infact you make a PPP connection between the PC and the LDK-24.
Use an USB-ISDN modem, they are easier to get to work than the serial ones.
///doktor