Remote access to PRI trunk

[NORTELCS]

hi

i have networked BCM with CS1000E trough H323.The PRI trunk is connected on the CS1000E i am trying to make call from the BCM trough the ISDN PRI trunks on the CS1000E but it was not going through.

i thing i need to configure some route in the CS1000E but i don't know what to configure HLOC in LD90.


any idea to help me to solve the problem

 

[johnpoole]

1st thing is in the 1000, make sure the trunk has an ncos high enough to make the call..can you dial the number now from the 1000? the tgar on the routes can not match.. the default is 1 so do a change on the ties and tgar x1... then try the call from the bcm and do a trac or a ld 96 enl msgi x on the d and post the msg

john poole
bellsouth business
columbia,sc

 

[NORTELCS]

i have configured the NCOS and the Tgar is X1 also i can see the number on the VTRK DCH and i am using 9 as AC1. what i am sending from the BCM is for ex. 978459300 and i have configured the 7 as SPN in LD90. should i send the number with 9 or without from BCM to CS1k.

from the CS1k i can dial 978459300 and it will show in PRI DCH 78459300 and it is working fine

thanks.

 

[acewarlock]

From the phone you used to test on the CS1k, what is the NCOS?




This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.

 

[NORTELCS]

it is NCOS 1 which is for local number, also the VTRK trunks are NCOS 1

 

[acewarlock]

So with a NCOS 1 you can make that call from your phone?

Send the number with the 9 and without the 7, so when it gets to the CS1000E it see's 98459300.




This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.

 

[Triton101]

is there a private or public setting on the route in the BCM? for the h.323, try both...

 

[NORTELCS]

i have tried with private and public

 

[MagnaRGP]

Try sending the call as NATIONAL from the BCM, but do not send the 9.

 

[acewarlock]

Have you used the BCM Monitor to see what your sending to the CS1000E?

Can you dial an EXT at the CS1000E?




This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.

 

[mmm2000]

i can see the number is coming on the VTRK D channel

 

[mmm2000]

sorry

are you able to see the number on the D channel of the VTRK .

sorry