Remote Access packages

[koulioumbis]

Hello Team Members.
I need to give a access to a sip user connected to a sip server to be able to get a line and make outgoing calls to real world.
My scenario is BCM50R6 with PRI trunk connected over SIP trunk to an asterisk box. I can make and receive calls with no issue but
I need to enable the asterisk SIP users to be able to dial 9 and pick a line from PRI in order to make external calls.
I have done in the past using remote access packages but I cannot remember what I have done.
Anybody can help?

thanks

Nikos

 

[Firebird Scrambler]

Hello Nikos

I did "play" with this on the older Norstar system some years ago. I'm not sure if you still need to use them as you might be able to just set up a routing table to allow access.

Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website =

http://somertel.myfreesites.net

linkedin