Remote Access Over Frame Relay ????????

[Trinak]

Hi everybody,
Has anybody got any ideas on how to get a branch office win95 pc to logon to an NT 4 sp4 server in HQ.
All branches and HQ reside on an IP over frame relay network via cisco 1600 series routers.
Always getting "No Domain Controller can be found..." error.
Have installed RRAS on test server but can't find any documentation on how to set it up.
Anything else needed to be done to client side or routers ????
Any help will be welcomed.

 

[axslinger]

Make the following config's to theCisco routers,
1) IP Directed-Broadcast (on ALL interfaces)
2) IP Helper-Address 0.0.0.0 (where 0.0.0.0 is the remote network address i.e. 192.168.150.0)

Also, you may need to set up lmhosts files on the remote workstations. I ran into the exact problem you are having with a T1 line. The above things fixed it. In my case I also set the service-module data-coding to inverted. That probably wouldn't apply to you.

Brian