Remirror Hot Swap Drives

[unit512]

We have two drives under Novell 4.2.
They are mirrored and are hot swapable.

One drive went out and we replaced.
We now get "mirrored drives are not in synch"

Novell sees the drive, but that is all.

What is the best way to get the mirror back up.

The command "remirror drives" does not do the trick.

I have the tech sheet for unmirroring and remirroring two internal drives...but its rather convoluted.

Thanks,
Glenn

 

[yvfwc]

Have you loaded Install>Disk Options>Mirror/Unmirror Disk Partitions>and pressed F3? If so, you may have to re-boot the server to trigger the re-mirror.

Good Luck,

Mark ;-)

 

[unit512]

No, but I will.
If it only turns out to be that easy!!!!