Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Remap keyboard question
- Thread starter SAMMEE2
- Start date
- Thread starter
- #3
It doesn't look like Alt up arrow can be mapped, so my hunch is that you'll need to use Doorway Mode to send that keystroke. You can turn this on by selecting the Data | Doorway Mode menu item.
- Thread starter
- #5
Found a way so I'll share how I did it.
First I used this script to see what was being sent.
proc main
keyget i0
usermsg "%x" i0
endproc
By running this and pressing ALT & ARROW UP it showed that c26 was being sent, then made below script to have key press send it.
proc main
sendvkey 0xc26
endproc
Voila' mission accomplished.
First I used this script to see what was being sent.
proc main
keyget i0
usermsg "%x" i0
endproc
By running this and pressing ALT & ARROW UP it showed that c26 was being sent, then made below script to have key press send it.
proc main
sendvkey 0xc26
endproc
Voila' mission accomplished.
Good to hear you found a way to do it, looks like I misread the original question.
- Status
Similar threads
