Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations John Tel on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Reload software CS1000M

Status
Not open for further replies.
ANESTECH

ANESTECH

Technical User
Oct 1, 2010
48
MX
GOODY DAY,

ME HAVE A CS1000M RLSE 6.0, HAVE 2 CPU´S, LAST 2 WEEK CPU 0 HAVE A TROUBLES A SWITCHOVER TO CPU 1, I CHECK THE STATUS THE INFO OF CPU 0 AND I CAN´T VIEW THE SO VXWORKS, ME REVIEW THE COMPAC FLASH AND NOT CANN´T READ IT, I REPLACE FOR OTHER CF OF 1 GB AND WHEN TRYING RELOAD VXWORKS TELL ME THAT NO PARTITIONED, I ACCEPT THAT SYSTEM DO IT THE PARTITION AND TELL ME THAT IS CORRECT, WHEN I TRY RELOAD THE SYSTEM TELL ME THAT CF NO IS PARTITIONED.

HOW I CAN RESOLVE THIS?

THANKS
 
Sort by date Sort by votes
You can format the CF from the install tools menu. I've seen instances where the CF displays as a 16 MB card instead of 1 gig. If that doesn't work you might have a bad CF. If so, replace the FMD and reload the software.
 
Upvote 0 Downvote
I TRIED AND GIVE THE NEXT INFO:

VxWorks System Boot


Copyright 1984-2004 Wind River Systems, Inc.





CPU: CP PIV - Pentium M 1.1 GHz
Version: VxWorks5.5.1
BSP version: 2.3/1.0
Creation date: Jun 2 2009, 17:53:21

/dev/hda1 /boot msdos ro,autosync
/dev/hda2 /p vfat ro,autosync
/dev/hda3 /d vfat rw,autosync
/dev/hda4 /e vfat rw,autosync
/dev/hdb1 /cf2 msdos user,rw,noauto,changenowarn
Mounting /cf2
Found /cf2/nvram.sys
Mounting /boot

Selecting nvram file from 1 sources


Reading boot parameters from /cf2/nvram.sys


Press ^B to stop auto-boot...
7

6

5

4

3

2

1

0

auto-booting...


boot device : ata=0,1
unit number : 0
processor number : 0
file name : /cf2/install/instos.sys
flags (f) : 0x2
other (o) : gei

Attaching to disk device...
mounting /cf2
done.
Loading /cf2/install/instos.sys...4775936 + 10993664
Starting at 0x308000...

0x11fee544 (tRootTask): logging started to /tyCo/0 [3], queue size 256
usrAtaInit
usrAtaInit trying controller 0
usrAtaInit: Adding block device /dev/hda = 0x11dd459c
usrAtaInit: Adding block device /dev/hdb = 0x11dd4050
usrAtaInit trying controller 1
usrAtaInit done
0x11fee544 (tRootTask): before usrNetInit()
Host Name: bootHost
Target Name: vxTarget
User: target
Attaching interface lo0... done
Starting usrNetIfAutoConfig
usrNetIfAutoConfig: 10.09.141.190:ff000000
Completed usrNetIfAutoConfig
Attached IPv4 interface to gei unit 0
0x11fee544 (tRootTask): after usrNetInit()
Loading symbol table from /cf2/install/instos.sym ...

dosChkLib : CLOCK_REALTIME is being reset to TUE DEC 28 00:00:00 2010
Value obtained from file system volume descriptor pointer: 0x10c6cb20
The old setting was THU JAN 01 00:00:00 1970
Accepted system dates are greater than THU DEC 27 00:00:00 1990

/cf2/ - Volume is OK
done
0x11fee544 (tRootTask): before wdbConfig()
0x11fee544 (tRootTask): after wdbConfig()


]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
]]]]]]]]]]] ]]]] ]]]]]]]]]] ]] ]]]] (R)
] ]]]]]]]]] ]]]]]] ]]]]]]]] ]] ]]]]
]] ]]]]]]] ]]]]]]]] ]]]]]] ] ]] ]]]]
]]] ]]]]] ] ]]] ] ]]]] ]]] ]]]]]]]]] ]]]] ]] ]]]] ]] ]]]]]
]]]] ]]] ]] ] ]]] ]] ]]]]] ]]]]]] ]] ]]]]]]] ]]]] ]] ]]]]
]]]]] ] ]]]] ]]]]] ]]]]]]]] ]]]] ]] ]]]] ]]]]]]] ]]]]
]]]]]] ]]]]] ]]]]]] ] ]]]]] ]]]] ]] ]]]] ]]]]]]]] ]]]]
]]]]]]] ]]]]] ] ]]]]]] ] ]]] ]]]] ]] ]]]] ]]]] ]]]] ]]]]
]]]]]]]] ]]]]] ]]] ]]]]]]] ] ]]]]]]] ]]]] ]]]] ]]]] ]]]]]
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
]]]]]]]]]]]]]]]]]]]]]]]]]]]]] Development System
]]]]]]]]]]]]]]]]]]]]]]]]]]]]
]]]]]]]]]]]]]]]]]]]]]]]]]]] VxWorks version 5.5.1
]]]]]]]]]]]]]]]]]]]]]]]]]] KERNEL: WIND version 2.6
]]]]]]]]]]]]]]]]]]]]]]]]] Copyright Wind River Systems, Inc., 1984-2003

CPU: CP PIV - Pentium M 1.1 GHz. Processor #0.
Memory Size: 0x20000000. BSP version 2.3/1.0.
WDB Comm Type: WDB_COMM_END
WDB: Ready.


****OS RESTART****
init tod
init disk redundancy phase 1
init basic disk redundancy
DR: drSmallInit() failed.

Cannot get the tty_device baud rate from system.ini file

========================
=== ===
=== CPP === N O R T E L
=== Systems ===
=== ===
========================

CPU: CP PIV - Pentium M 1.1 GHz (512 MB) BSP version: 1.2/3a
VxWorks: VxWorks5.5.1 Created: Jun 2 2009, 17:51:43
Copyright 1999-2007 Nortel
Copyright 1984-2005 Wind River Systems, Inc.




Communication Server 1000 Software/Database/BOOTROM RMD Install Tool
====================================================================

#####
######### ########
########`` `#############
######## `` `#############
#######` ######```####
####### ######`` `### NORTEL
####### #####`` ####
####### #####` #### Communication Server 1000 Software
`#########` ####`
#######` ##### Install Tool version 29
`####### #####`
########## `###` Copyright 1992 - 2007
##``########## #
## `########################
`# `########################
###########################``
````````` ````####````

Please press <CR> when ready ...



*****************************************************************

WARNING:


This software does not support TNs configured on PE/EPE

shelves. Upgrading to this software release will permanently

disable all TNs configured on PE/EPE and will not allow new

TNs to be configured.

Proceed with the upgrade? (Y/N) Y


*****************************************************************

WARNING:


Upgrading from pre-Release 4.5 software to Release 4.5 or higher

will result in the system PDT passwords being reset to default.

Proceed with the upgrade? (Y/N) Y


>Obtaining and checking system configuration ...
>Validate hard disk partitions
Validate number of hard drive partitions and size ...
The size of partition /p is 0 Mb:
Disk check failed: the disk is not correctly partitioned
INST0010 Unable to validate Hard disk partition "/u"
errNo : 0xd0003

Please press <CR> when ready ...

INST0010 Unable to validate Hard disk partition "/p"

Please press <CR> when ready ...

INST0010 Unable to validate Hard disk partition "/e"

Please press <CR> when ready ...


Communication Server 1000 Software/Database/BOOTROM RMD Install Tool
====================================================================

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

The Fix Media Device on Core 0 is blank.

Install cannot continue unless the FMD is partitioned.
Note: INSTALL WILL REBOOT AFTER THIS PROCEDURE AND
FIX MEDIA WILL BE EMPTY AFTER YOU PARTITION IT.
INSTALL REMOVABLE MEDIA MUST BE IN THE DRIVE AT THIS TIME.


Please enter:
<CR> -> <a> - Partition the Fix Media Device.
<q> - Quit from this menu and leave the Fix Media Device unchanged.

Enter choice>
Clearing partitions on hda
>Repartitioning Fix Media Device ...
>Fix Media Device repartition completed
>Formatting FMD ...
Retrieved old volume params with %100 confidence:
Volume Parameters: FAT type: FAT16, sectors per cluster 2
2 FAT copies, 0 clusters, 64 sectors per FAT
Sectors reserved 1, hidden 63, FAT sectors 128
Root dir entries 512, sysId (null) , serial number 9c0cd7db
Label:" " ...
Disk with 32705 sectors of 512 bytes will be formatted with:
Volume Parameters: FAT type: FAT16, sectors per cluster 2
2 FAT copies, 16240 clusters, 64 sectors per FAT
Sectors reserved 1, hidden 63, FAT sectors 128
Root dir entries 512, sysId VXDOS16 , serial number 9c0cd7db
Label:" " ...
Retrieved old volume params with %95 confidence:
Volume Parameters: FAT type: FAT32, sectors per cluster 8
2 FAT copies, 0 clusters, 608 sectors per FAT
Sectors reserved 32, hidden 0, FAT sectors 1216
Root dir entries 0, sysId (null) , serial number 6e657272
Label:" " ...
Disk with 622592 sectors of 512 bytes will be formatted with:
Volume Parameters: FAT type: FAT32, sectors per cluster 8
2 FAT copies, 77660 clusters, 608 sectors per FAT
Sectors reserved 32, hidden 63, FAT sectors 1216
Root dir entries 0, sysId VX5DOS32, serial number 6e657272
Label:" " ...
Retrieved old volume params with %95 confidence:
Volume Parameters: FAT type: FAT32, sectors per cluster 8
2 FAT copies, 0 clusters, 608 sectors per FAT
Sectors reserved 32, hidden 0, FAT sectors 1216
Root dir entries 0, sysId (null) , serial number 57e20000
Label:" " ...
Disk with 622592 sectors of 512 bytes will be formatted with:
Volume Parameters: FAT type: FAT32, sectors per cluster 8
2 FAT copies, 77660 clusters, 608 sectors per FAT
Sectors reserved 32, hidden 63, FAT sectors 1216
Root dir entries 0, sysId VX5DOS32, serial number 57e20000
Label:" " ...
Retrieved old volume params with %95 confidence:
Volume Parameters: FAT type: FAT32, sectors per cluster 8
2 FAT copies, 0 clusters, 608 sectors per FAT
Sectors reserved 32, hidden 0, FAT sectors 1216
Root dir entries 0, sysId (null) , serial number 58190000
Label:" " ...
Disk with 622592 sectors of 512 bytes will be formatted with:
Volume Parameters: FAT type: FAT32, sectors per cluster 8
2 FAT copies, 77660 clusters, 608 sectors per FAT
Sectors reserved 32, hidden 63, FAT sectors 1216
Root dir entries 0, sysId VX5DOS32, serial number 58190000
Label:" " ...



/boot/ - Volume is OK



/p/ - Volume is OK



/d/ - Volume is OK



/e/ - Volume is OK
>Fix Media Device format completed
>Rebooting system ...
Phoenix NoteBIOS 4.0 Release 6.0 Copyright 1985-2003 Phoenix Technologies Ltd. All Rights Reserved  Motorola Inc. CPP4 BIOS Version 1.2 CPU = Mobile Genuine Intel(R) processor 1100MHz 226M System RAM Passed                Press <F2> to enter SETUP  5111024K Cache SRAM PassedSystem BIOS shadowedFixed Disk 0: CF CARD 1GB Fixed Disk 1: STEC M2+ CF 9.0.2          |  | Shadow Ram : 384 KB COM Ports : 03F8 02F8 |  | Cache Ram : 1024 KB LPT Ports : None |  | Display Type : Monochrome |  | Hard Disk 0 : CF CARD 1GB-(PM) |  | Hard Disk 1 : STEC M2+ CF 9.0.2- S) |  | Hard Disk 2 : None Diskette A : 1.44/1.25 MB 3/" |  | Hard Disk 3 : None |  +-------------------------------------------------------------------------+         Press Any Key to Continue                 +-------------------------------------------------------------------------+  | PhoenixBIOS Setup Utility |  | |  | CPU Type : Mobile Genuine Intel(R) processor 1100MHz |  | CPU Speed : 1100 MHz |  | System ROM : E23D - FFFF |  | System Memory : 640 KB BIOS Date : 05/24/05 | | Extended Memory : 522240 KB  V1.6a++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++usrAtaInit
usrAtaInit trying controller 0
usrAtaInit: Adding block device /dev/hda = 0x131d4a5c
usrAtaInit: Adding block device /dev/hdb = 0x131d4510
usrAtaInit trying controller 1
usrAtaInit done











VxWorks System Boot


Copyright 1984-2004 Wind River Systems, Inc.





CPU: CP PIV - Pentium M 1.1 GHz
Version: VxWorks5.5.1
BSP version: 2.3/1.0
Creation date: Jun 2 2009, 17:53:21

/dev/hda1 /boot msdos ro,autosync
/dev/hda2 /p vfat ro,autosync
/dev/hda3 /d vfat rw,autosync
/dev/hda4 /e vfat rw,autosync
/dev/hdb1 /cf2 msdos user,rw,noauto,changenowarn
Mounting /cf2
Found /cf2/nvram.sys
Mounting /boot

Selecting nvram file from 1 sources


Reading boot parameters from /cf2/nvram.sys


Press ^B to stop auto-boot...
7

6

5

4

3

2

1

0

auto-booting...


boot device : ata=0,1
unit number : 0
processor number : 0
file name : /cf2/install/instos.sys
flags (f) : 0x2
other (o) : gei

Attaching to disk device...
mounting /cf2
done.
Loading /cf2/install/instos.sys...4775936 + 10993664
Starting at 0x308000...

0x11fee544 (tRootTask): logging started to /tyCo/0 [3], queue size 256
usrAtaInit
usrAtaInit trying controller 0
usrAtaInit: Adding block device /dev/hda = 0x11dd459c
usrAtaInit: Adding block device /dev/hdb = 0x11dd4050
usrAtaInit trying controller 1
usrAtaInit done
0x11fee544 (tRootTask): before usrNetInit()
Host Name: bootHost
Target Name: vxTarget
User: target
Attaching interface lo0... done
Starting usrNetIfAutoConfig
usrNetIfAutoConfig: 10.09.141.190:ff000000
Completed usrNetIfAutoConfig
Attached IPv4 interface to gei unit 0
0x11fee544 (tRootTask): after usrNetInit()
Loading symbol table from /cf2/install/instos.sym ...

dosChkLib : CLOCK_REALTIME is being reset to TUE DEC 28 00:00:00 2010
Value obtained from file system volume descriptor pointer: 0x10c6cb20
The old setting was THU JAN 01 00:00:00 1970
Accepted system dates are greater than THU DEC 27 00:00:00 1990

/cf2/ - Volume is OK
done
0x11fee544 (tRootTask): before wdbConfig()
0x11fee544 (tRootTask): after wdbConfig()


]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
]]]]]]]]]]] ]]]] ]]]]]]]]]] ]] ]]]] (R)
] ]]]]]]]]] ]]]]]] ]]]]]]]] ]] ]]]]
]] ]]]]]]] ]]]]]]]] ]]]]]] ] ]] ]]]]
]]] ]]]]] ] ]]] ] ]]]] ]]] ]]]]]]]]] ]]]] ]] ]]]] ]] ]]]]]
]]]] ]]] ]] ] ]]] ]] ]]]]] ]]]]]] ]] ]]]]]]] ]]]] ]] ]]]]
]]]]] ] ]]]] ]]]]] ]]]]]]]] ]]]] ]] ]]]] ]]]]]]] ]]]]
]]]]]] ]]]]] ]]]]]] ] ]]]]] ]]]] ]] ]]]] ]]]]]]]] ]]]]
]]]]]]] ]]]]] ] ]]]]]] ] ]]] ]]]] ]] ]]]] ]]]] ]]]] ]]]]
]]]]]]]] ]]]]] ]]] ]]]]]]] ] ]]]]]]] ]]]] ]]]] ]]]] ]]]]]
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
]]]]]]]]]]]]]]]]]]]]]]]]]]]]] Development System
]]]]]]]]]]]]]]]]]]]]]]]]]]]]
]]]]]]]]]]]]]]]]]]]]]]]]]]] VxWorks version 5.5.1
]]]]]]]]]]]]]]]]]]]]]]]]]] KERNEL: WIND version 2.6
]]]]]]]]]]]]]]]]]]]]]]]]] Copyright Wind River Systems, Inc., 1984-2003

CPU: CP PIV - Pentium M 1.1 GHz. Processor #0.
Memory Size: 0x20000000. BSP version 2.3/1.0.
WDB Comm Type: WDB_COMM_END
WDB: Ready.


****OS RESTART****
init tod
init disk redundancy phase 1
init basic disk redundancy
DR: drSmallInit() failed.

Cannot get the tty_device baud rate from system.ini file

========================
=== ===
=== CPP === N O R T E L
=== Systems ===
=== ===
========================

CPU: CP PIV - Pentium M 1.1 GHz (512 MB) BSP version: 1.2/3a
VxWorks: VxWorks5.5.1 Created: Jun 2 2009, 17:51:43
Copyright 1999-2007 Nortel
Copyright 1984-2005 Wind River Systems, Inc.




Communication Server 1000 Software/Database/BOOTROM RMD Install Tool
====================================================================

#####
######### ########
########`` `#############
######## `` `#############
#######` ######```####
####### ######`` `### NORTEL
####### #####`` ####
####### #####` #### Communication Server 1000 Software
`#########` ####`
#######` ##### Install Tool version 29
`####### #####`
########## `###` Copyright 1992 - 2007
##``########## #
## `########################
`# `########################
###########################``
````````` ````####````

Please press <CR> when ready ...



*****************************************************************

WARNING:


This software does not support TNs configured on PE/EPE

shelves. Upgrading to this software release will permanently

disable all TNs configured on PE/EPE and will not allow new

TNs to be configured.

Proceed with the upgrade? (Y/N) Y


*****************************************************************

WARNING:


Upgrading from pre-Release 4.5 software to Release 4.5 or higher

will result in the system PDT passwords being reset to default.

Proceed with the upgrade? (Y/N) Y


>Obtaining and checking system configuration ...
>Validate hard disk partitions
Validate number of hard drive partitions and size ...
The size of partition /p is 0 Mb:
Disk check failed: the disk is not correctly partitioned
INST0010 Unable to validate Hard disk partition "/u"
errNo : 0xd0003

Please press <CR> when ready ...

INST0010 Unable to validate Hard disk partition "/p"

Please press <CR> when ready ...

INST0010 Unable to validate Hard disk partition "/e"

Please press <CR> when ready ...


Communication Server 1000 Software/Database/BOOTROM RMD Install Tool
====================================================================

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

The Fix Media Device on Core 0 is blank.

Install cannot continue unless the FMD is partitioned.
Note: INSTALL WILL REBOOT AFTER THIS PROCEDURE AND
FIX MEDIA WILL BE EMPTY AFTER YOU PARTITION IT.
INSTALL REMOVABLE MEDIA MUST BE IN THE DRIVE AT THIS TIME.


Please enter:
<CR> -> <a> - Partition the Fix Media Device.
<q> - Quit from this menu and leave the Fix Media Device unchanged.

Enter choice>
Clearing partitions on hda
>Repartitioning Fix Media Device ...
>Fix Media Device repartition completed
>Formatting FMD ...
Retrieved old volume params with %100 confidence:
Volume Parameters: FAT type: FAT16, sectors per cluster 2
2 FAT copies, 0 clusters, 64 sectors per FAT
Sectors reserved 1, hidden 63, FAT sectors 128
Root dir entries 512, sysId (null) , serial number 9c0cd7db
Label:" " ...
Disk with 32705 sectors of 512 bytes will be formatted with:
Volume Parameters: FAT type: FAT16, sectors per cluster 2
2 FAT copies, 16240 clusters, 64 sectors per FAT
Sectors reserved 1, hidden 63, FAT sectors 128
Root dir entries 512, sysId VXDOS16 , serial number 9c0cd7db
Label:" " ...
Retrieved old volume params with %95 confidence:
Volume Parameters: FAT type: FAT32, sectors per cluster 8
2 FAT copies, 0 clusters, 608 sectors per FAT
Sectors reserved 32, hidden 0, FAT sectors 1216
Root dir entries 0, sysId (null) , serial number 6e657272
Label:" " ...
Disk with 622592 sectors of 512 bytes will be formatted with:
Volume Parameters: FAT type: FAT32, sectors per cluster 8
2 FAT copies, 77660 clusters, 608 sectors per FAT
Sectors reserved 32, hidden 63, FAT sectors 1216
Root dir entries 0, sysId VX5DOS32, serial number 6e657272
Label:" " ...
Retrieved old volume params with %95 confidence:
Volume Parameters: FAT type: FAT32, sectors per cluster 8
2 FAT copies, 0 clusters, 608 sectors per FAT
Sectors reserved 32, hidden 0, FAT sectors 1216
Root dir entries 0, sysId (null) , serial number 57e20000
Label:" " ...
Disk with 622592 sectors of 512 bytes will be formatted with:
Volume Parameters: FAT type: FAT32, sectors per cluster 8
2 FAT copies, 77660 clusters, 608 sectors per FAT
Sectors reserved 32, hidden 63, FAT sectors 1216
Root dir entries 0, sysId VX5DOS32, serial number 57e20000
Label:" " ...
Retrieved old volume params with %95 confidence:
Volume Parameters: FAT type: FAT32, sectors per cluster 8
2 FAT copies, 0 clusters, 608 sectors per FAT
Sectors reserved 32, hidden 0, FAT sectors 1216
Root dir entries 0, sysId (null) , serial number 58190000
Label:" " ...
Disk with 622592 sectors of 512 bytes will be formatted with:
Volume Parameters: FAT type: FAT32, sectors per cluster 8
2 FAT copies, 77660 clusters, 608 sectors per FAT
Sectors reserved 32, hidden 63, FAT sectors 1216
Root dir entries 0, sysId VX5DOS32, serial number 58190000
Label:" " ...



/boot/ - Volume is OK



/p/ - Volume is OK



/d/ - Volume is OK



/e/ - Volume is OK
>Fix Media Device format completed
>Rebooting system ...
Phoenix NoteBIOS 4.0 Release 6.0 Copyright 1985-2003 Phoenix Technologies Ltd. All Rights Reserved  Motorola Inc. CPP4 BIOS Version 1.2 CPU = Mobile Genuine Intel(R) processor 1100MHz 226M System RAM Passed                Press <F2> to enter SETUP  5111024K Cache SRAM PassedSystem BIOS shadowedFixed Disk 0: CF CARD 1GB Fixed Disk 1: STEC M2+ CF 9.0.2          |  | Shadow Ram : 384 KB COM Ports : 03F8 02F8 |  | Cache Ram : 1024 KB LPT Ports : None |  | Display Type : Monochrome |  | Hard Disk 0 : CF CARD 1GB-(PM) |  | Hard Disk 1 : STEC M2+ CF 9.0.2- S) |  | Hard Disk 2 : None Diskette A : 1.44/1.25 MB 3/" |  | Hard Disk 3 : None |  +-------------------------------------------------------------------------+         Press Any Key to Continue                 +-------------------------------------------------------------------------+  | PhoenixBIOS Setup Utility |  | |  | CPU Type : Mobile Genuine Intel(R) processor 1100MHz |  | CPU Speed : 1100 MHz |  | System ROM : E23D - FFFF |  | System Memory : 640 KB BIOS Date : 05/24/05 | | Extended Memory : 522240 KB  V1.6a+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++usrAtaInit
usrAtaInit trying controller 0
usrAtaInit: Adding block device /dev/hda = 0x131d4a5c
usrAtaInit: Adding block device /dev/hdb = 0x131d4510
usrAtaInit trying controller 1
usrAtaInit done








 
Upvote 0 Downvote
Looks like its time to try a different FMD. You can try attaching the original to your PC and see if your PC can ID it as a valid card.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Everest67
  • Locked
  • Question
ENET card CS1000M
Replies
6
Views
410
Firebird Scrambler
Firebird Scrambler
LittleMaster
  • Locked
  • Question
Unable to invoke software installation
2
Replies
22
Views
940
Firebird Scrambler
Firebird Scrambler
LittleMaster
  • Locked
  • Question
Software needed for cs1k ls 45 FEATURE SET 1
Replies
1
Views
262
Firebird Scrambler
Firebird Scrambler
CentralJIM
  • Locked
  • Question
CS1000M SG no redundancy
Replies
4
Views
262
CentralJIM
CentralJIM
cflynt
  • Locked
  • Question
CS1000M QOS038 Bandwidth errors, referencing removing Zone 0
Replies
0
Views
153
cflynt
cflynt

Part and Inventory Search

Sponsor

Back
Top