HelperForPBXman
IS-IT--Management
I am doing a new install for Modular Messaging 5.2. I am using the S8800 as my MSS. I had to reload the Red Hat image on the server. How do reload the MSS application software?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Reload MSS 5.2
- Thread starter HelperForPBXman
- Start date
- Status
See below
9. When the system displays the localhost login prompt, type root and then press Enter.
10. Insert the Modular Messaging R5.2 MSS Application disk into the MSS.
! CAUTION:
CAUTION: Wait for the drive light to stop flashing and go out before you continue.
11. At the prompt, type /etc/autoinstall and press Enter.
12. If the system prompts you to continue or quit, press Enter to continue.
13. The system prompts you to change several passwords.
? Enter the passwords that are provided for the following logins: root, craft, tsc, sroot,
and craftppp.
? You can ignore any warnings, such as the passwords being too short.
When the installation is complete, the system prompts you to remove the media from the
drive.
14. Remove the Modular Messaging R5.2 MSS Application disk.
15. Press Enter to reboot the system.
The system displays Press Enter to return to prompt..., press Enter.
16. At the localhost login prompt, log on to the MSS as craft.
The server displays the Messaging Administration web interface.
17. To bring the server into service, continue with the appropriate procedure:
Ken Means
"I find that the harder I work, the more luck I seem to have."
- Thomas Jefferson (1743-1826)
9. When the system displays the localhost login prompt, type root and then press Enter.
10. Insert the Modular Messaging R5.2 MSS Application disk into the MSS.
! CAUTION:
CAUTION: Wait for the drive light to stop flashing and go out before you continue.
11. At the prompt, type /etc/autoinstall and press Enter.
12. If the system prompts you to continue or quit, press Enter to continue.
13. The system prompts you to change several passwords.
? Enter the passwords that are provided for the following logins: root, craft, tsc, sroot,
and craftppp.
? You can ignore any warnings, such as the passwords being too short.
When the installation is complete, the system prompts you to remove the media from the
drive.
14. Remove the Modular Messaging R5.2 MSS Application disk.
15. Press Enter to reboot the system.
The system displays Press Enter to return to prompt..., press Enter.
16. At the localhost login prompt, log on to the MSS as craft.
The server displays the Messaging Administration web interface.
17. To bring the server into service, continue with the appropriate procedure:
Ken Means
"I find that the harder I work, the more luck I seem to have."
- Thomas Jefferson (1743-1826)
- Status