Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Registry change disappears after reboot

Status
Not open for further replies.

dporrelli

Programmer
Dec 18, 2002
43
GB
I need to add string to the follow :
HKEY_LOCAL_MACHINE\Hardware\DeviceMap\SCSI\SCSI Port 3\SCSI Bus 0\Target ID 6\Logical Unit ID 0
When I add this and reboot the new string value that I added is gone.
This Server is on SP2 with all the updates etc...
This is a stand-alone system, it is not on the domain and at the moment isn't even sitting on the network.
Everything I've looked at so far seems to point to a GPO, I ran RSoP but can not see anything wrong (every setting is pretty much set to not defined just now).

Thanks
 
Could it be that windows will scan the hardware on every boot and set the registry settings?
 
Thanks for that. If that is the case, is there anyway to disable this?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top