Registering AASTRA DT390/690 DECT terminals in iPECS GDC600 DECT system

[edgarquadros]

thread1613-1752381
I'm trying to register this kind of terminals such as described in this post:

https://www.tek-tips.com/viewthread.cfm?qid=1752381

But I'm not having success. The iPECS GDC600 is configured in the eMG80 system, and working fine with iPECS DECT terminals (GDC500H). But when I tried to register AASTRA DT390 terminal as a Standard GAP, and putting the same PARK and AC of the iPECS system, as you can see in the print attached here:

I received the message "Registration Failed" in AASTRA DT390 terminal.
Any idea?

BR,
Edgar

 

[doktor]

Hi Edgarquadors.
The AASTRA/Mitel DT390 terminal can give you some issues, since it is normally used with DECT SARI systems from Ericsson/Aastra/Mitel SARI DECT systems.(Today Ascom systems).
See if it is possible to change to SARI in the eMG80 for the extension in question, since DT390 is NOT standard GAP.
I have got it to work on ipLDK and old iPECS systems, but handover did not work in all cases.
BR doktor

///doktor
____________________________________

http://www.kandu.dk/spg153996.aspx