Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
registering 7406e
- Thread starter teltek03
- Start date
I have a ten foot pole!
Anybody wanna take a poke at this one?
If nothing else, maybe we should take a vote.
As much as I love them ICS Norstars, I've never had much faith in any of the Norstar cordless models. Most customers find that a dirt cheap, standard, cordless set on an ATA is far more practical and cost effective even if they can only have one line.
I don't know, maybe it's just me but I can't help but wonder how many other people think the 7410's and 7405e's were over rated, over priced, pains in the a$$? LOL!
Phonehed in Dallas
Anybody wanna take a poke at this one?
If nothing else, maybe we should take a vote.
As much as I love them ICS Norstars, I've never had much faith in any of the Norstar cordless models. Most customers find that a dirt cheap, standard, cordless set on an ATA is far more practical and cost effective even if they can only have one line.
I don't know, maybe it's just me but I can't help but wonder how many other people think the 7410's and 7405e's were over rated, over priced, pains in the a$$? LOL!
Phonehed in Dallas
misseditbythatmuch
Technical User
Assigning the Handset to the Base Station
When you assign the first handset to a base station, you must send the
security code to the base station. For subsequent handsets, you only
need to identify the security code on the handset itself. This is
explained in detail in later sections.
This is the general process for setting up a T7406 handset:
• Identify the handset to a unique Handset ID # (1, 2, or 3)
Note: The handset ID #, which gets assigned to each handset,
matches up to TCM/RJ-11 jack on the back of the base .
station. Ask your system administrator which handset ID
maps to which set DN on the system.
• Change the default password for selecting a handset ID (default:
000000)
• Assign a Security code (S.S. code)
• Send the Security code from the handset to the base station
Note: Sending the security code to the base station is only
performed for the first handsets. For subsequent handsets,
you need only identify the security code on the handset.
• Assign the ring type
• Assign the ringer volume
• Assign the language that appears on the handset display
30 / Handset Configuration
P0606142 01
Using the Handset Display Buttons
The T7406 handset has a three-line display.
The three display buttons located under the display are used to interact
with the handset menus and the feature code messages that appear on the
display.
• The first line of
the display
shows handset
messages and
menu items.
• The second
line displays
button labels in
capital letters.
• The third line displays the antenna/signal strength icon and the
battery charge icon.
Configuring the First Handset to a Base Station
When you configure a handset to a new base station, you must ensure
the base station receives the assigned security code. For subsequent
handsets, the security code must be identical, but it does not need to be
re-assigned to the base station.
Other settings are the same for all handsets.
Configuring the Handset ID Number
Each of the three handsets registered to a base station share an identical
Security code, but each handset has a unique Set ID of 1, 2, or 3.
Follow these steps to set the handset ID and new password:
1. Press the Options button.
2. Press
.
3. Press until the display shows .
4. Press
.
The display shows the current Handset ID #.
• If this is the correct number, press and continue with
the next section.
Feature message
Button label
Display icons
Display button
Handset Configuration / 31
T7406 Installation Guide
• If you want to change the number, follow these steps:
a. Press .
The display shows . (six digits)
b. Enter the default password (000000).
c. Press to accept the code.
The display shows
!".The current
Handset ID # is displayed on the bottom left of the
LCD.
d. Press the digit that you want to assign to this handset.
e. Press .
The display shows .
Changing the Handset ID Password
After you enter the handset ID, if you want to change the password for
the ID access, follow these steps:
1. Press until the display shows # $
.
Note: This password is used to access the Handset ID option. If
you decide not to change the password, press the Option
button to exit the menu.
2. Press
.
The display shows % .
3. Enter the default six-digit password (000000) or the last password
you entered.
4. Press .
The display shows .
5. Enter a new six-digit password.
Note: For ease of administration, it is recommended that you use
the same password as the one you used for the Security
code/S.S. Code.
32 / Handset Configuration
P0606142 01
6. Press .
The display shows & .
7. Re-enter the password.
8. Press .
The display shows $
'.
9. Press the Options button to exit the Option menu
The display changes to show the date and time.
Password errors
If you enter an incorrect password and the display shows ',
return to the # $
menu item and try again.
Lost password
Make a note of the new password. If you forget your password, you will
need to contact your Distributor for help to unlock the set.
Assigning the Security Code
After you assign the handset ID # to a handset, you need to configure
the handset to a base station.
Follow these steps to assign a Security code to the handset.
1. Press the Options button.
2. Press
.
3. Press until the display shows (
).
4. Press to assign a security code to the handset. The display
shows .
5. Enter the six-digit password (default 000000).
6. Press . The display shows
.
7. Enter the six-digit Security code.
The display changes to show the code as entered.
8. Press to accept the code.
The display shows (
).
If you are assigning a handset to an existing base, your handset is now
connected to the system.
Setting Handset Features / 33
T7406 Installation Guide
If you are assigning the first handset to a new base station (which has
no security code), continue with the following steps:
9. The display shows (
), press to get ready to
send the security code to the base station.
The display shows *
.
10. Unplug the AC power adapter connected to the base station, and
plug it back in again.
11. Within 15 seconds, press and hold the button for five seconds.
This sends the Security Code to the base station. The display
shows
'and you hear a beep when the transfer is
successful.
Note: If the Security Code transfer fails, the display shows
' To correct this, repeat steps 9 and 10.
12. Press the Options button to exit the Option menu.
The display changes to show the date and time.
Configure the next handset to the base station
Configure the second and third handsets to the base station using these
procedures:
1. Follow the steps in Configuring the Handset ID Number on page
30. Ensure you enter a different handset ID number (1, 2, or 3)
for each handset you configure.
2. If you want to change the handset ID password, continue with the
steps in Changing the Handset ID Password on page 31.
3. Once you have assigned a Handset ID #, continue with Assigning
the Security Code on page 32 up to and including step 8.
When you assign the first handset to a base station, you must send the
security code to the base station. For subsequent handsets, you only
need to identify the security code on the handset itself. This is
explained in detail in later sections.
This is the general process for setting up a T7406 handset:
• Identify the handset to a unique Handset ID # (1, 2, or 3)
Note: The handset ID #, which gets assigned to each handset,
matches up to TCM/RJ-11 jack on the back of the base .
station. Ask your system administrator which handset ID
maps to which set DN on the system.
• Change the default password for selecting a handset ID (default:
000000)
• Assign a Security code (S.S. code)
• Send the Security code from the handset to the base station
Note: Sending the security code to the base station is only
performed for the first handsets. For subsequent handsets,
you need only identify the security code on the handset.
• Assign the ring type
• Assign the ringer volume
• Assign the language that appears on the handset display
30 / Handset Configuration
P0606142 01
Using the Handset Display Buttons
The T7406 handset has a three-line display.
The three display buttons located under the display are used to interact
with the handset menus and the feature code messages that appear on the
display.
• The first line of
the display
shows handset
messages and
menu items.
• The second
line displays
button labels in
capital letters.
• The third line displays the antenna/signal strength icon and the
battery charge icon.
Configuring the First Handset to a Base Station
When you configure a handset to a new base station, you must ensure
the base station receives the assigned security code. For subsequent
handsets, the security code must be identical, but it does not need to be
re-assigned to the base station.
Other settings are the same for all handsets.
Configuring the Handset ID Number
Each of the three handsets registered to a base station share an identical
Security code, but each handset has a unique Set ID of 1, 2, or 3.
Follow these steps to set the handset ID and new password:
1. Press the Options button.
2. Press
.
3. Press until the display shows .
4. Press
.
The display shows the current Handset ID #.
• If this is the correct number, press and continue with
the next section.
Feature message
Button label
Display icons
Display button
Handset Configuration / 31
T7406 Installation Guide
• If you want to change the number, follow these steps:
a. Press .
The display shows . (six digits)
b. Enter the default password (000000).
c. Press to accept the code.
The display shows
!".The current
Handset ID # is displayed on the bottom left of the
LCD.
d. Press the digit that you want to assign to this handset.
e. Press .
The display shows .
Changing the Handset ID Password
After you enter the handset ID, if you want to change the password for
the ID access, follow these steps:
1. Press until the display shows # $
.
Note: This password is used to access the Handset ID option. If
you decide not to change the password, press the Option
button to exit the menu.
2. Press
.
The display shows % .
3. Enter the default six-digit password (000000) or the last password
you entered.
4. Press .
The display shows .
5. Enter a new six-digit password.
Note: For ease of administration, it is recommended that you use
the same password as the one you used for the Security
code/S.S. Code.
32 / Handset Configuration
P0606142 01
6. Press .
The display shows & .
7. Re-enter the password.
8. Press .
The display shows $
'.
9. Press the Options button to exit the Option menu
The display changes to show the date and time.
Password errors
If you enter an incorrect password and the display shows ',
return to the # $
menu item and try again.
Lost password
Make a note of the new password. If you forget your password, you will
need to contact your Distributor for help to unlock the set.
Assigning the Security Code
After you assign the handset ID # to a handset, you need to configure
the handset to a base station.
Follow these steps to assign a Security code to the handset.
1. Press the Options button.
2. Press
.
3. Press until the display shows (
).
4. Press to assign a security code to the handset. The display
shows .
5. Enter the six-digit password (default 000000).
6. Press . The display shows
.
7. Enter the six-digit Security code.
The display changes to show the code as entered.
8. Press to accept the code.
The display shows (
).
If you are assigning a handset to an existing base, your handset is now
connected to the system.
Setting Handset Features / 33
T7406 Installation Guide
If you are assigning the first handset to a new base station (which has
no security code), continue with the following steps:
9. The display shows (
), press to get ready to
send the security code to the base station.
The display shows *
.
10. Unplug the AC power adapter connected to the base station, and
plug it back in again.
11. Within 15 seconds, press and hold the button for five seconds.
This sends the Security Code to the base station. The display
shows
'and you hear a beep when the transfer is
successful.
Note: If the Security Code transfer fails, the display shows
' To correct this, repeat steps 9 and 10.
12. Press the Options button to exit the Option menu.
The display changes to show the date and time.
Configure the next handset to the base station
Configure the second and third handsets to the base station using these
procedures:
1. Follow the steps in Configuring the Handset ID Number on page
30. Ensure you enter a different handset ID number (1, 2, or 3)
for each handset you configure.
2. If you want to change the handset ID password, continue with the
steps in Changing the Handset ID Password on page 31.
3. Once you have assigned a Handset ID #, continue with Assigning
the Security Code on page 32 up to and including step 8.
- Status
