Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

regarding the overlay midnight routine.

Status
Not open for further replies.

Noynoy1967

Programmer
Oct 10, 2014
2
SA
Hello. any buddy can teach me regarding the overlay routine,there is a problem that i
can't solved the problem. every morning I was encounter our system option 61. every morning the Cpu 0 are running for the whole night and the Cpu 1 did't running auto so that every morning I was encounter our system all extension line not working. So that
Every morning I can shut off the power and a few minutes I can on again the power so that the system it well run and dial tone coming.

and here the result. ld 17
req chg
type ovly
sid
bkgd
fr44
pbxh
todr o6
drol
cy45
muti_user

But. in ld 22
here
req prt
type ovly
ovly
sid 0
bkgd 044
fr44 1
pbxh x
todr 06
drol 043
mid_scpu no
cy45 01
multi_user off

any buddy can teach me.

 
If you have to reboot your system to restore service, then your problem is deeper than what is running in background/midnight.
 
Get a qualified Nortel/Avaya vendor in to look at your system. Gwebster is correct. You have bigger problems.

Generally speaking, you do not want your CPU's switching from active to standby during midnights - so your 'mid_scpu no' setting is correct. But, if the standby CPU is powered down, it'll cause problems too. Both cores need to be up and running.

Your English is a bit difficult to understand. Try writing what you're saying in your native language in Google Translate and copy/paste the English translation here.
 
It sounds as if the two hard disks aren't syncronised. You might need to get them checked out in LD 135 and 137 to check the current status.

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

If it's working, then leave it alone!.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top