Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Reference Technical Warning 2005006321v2

Status
Not open for further replies.

acewarlock

Technical User
Sep 16, 2002
9,370
US
Anyone know where I can get a copy of Reference Technical Warning 2005006321v2 ????
 
A component issue has been found in BCM400 and BCM200 platforms under release BCM 3.0
and a limited number of BCM 3.5 Systems. The electrolytic capacitors used in the VRM power
conditioning circuitry of the SH815 computer motherboard can fail in the same manner as those
on the PW810 motherboard in the BCM1000 platforms, typically resulting in total loss of all NT
functionality and applications including:
- Loss of voice messaging and voice messaging mailboxes not being accessible.
- Loss of the service of other business applications including unified messaging, call center and
IVR in a similar fashion.
- Loss of data networking and Voice over IP (VOIP) services.
- Loss of MS Windows NT services, along with all applications running on this operating system.
A warm reset or power cycle is required to recover services after the failure occurs.
Circuit-switched (TDM) telephony services continue normally when loss of NT services above
occurs.
As the capacitors continue to degrade, the loss of NT functionality and applications will occur
sporadically with increasing frequency. Circuit-switched telephony will always remain available.

DueE
 
It is kinda newer release of the PAA for the base function tray on 3.0
it also happens on some 3.5 systems
 
DueE send it to whaglund-AT-netscape.net


Been out of town

Thanks
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top