Redundant DMZ on a TZ 205

[basball]

I just built a new web server with a mother board that has two Nic Cards:
These Nic Cards are teamed under one Nic:
192.168.4.4

Note: the team is designed to provide:
- fault tolerance
- shared bandwidth

I setup a DMZ zone (X2) with an IP address:
192.168.2.4

The 1st physical cable from the server:
Team Nic 1 of 2 is plugged into X2 and
every thing works fine.

Now I need to plug in the other physical
cable, Team nic 2 of 2 into DMZ zone (x3).
Note sure how I'm suppose to configure it?

I assume I need to assign it another IP
address, which obviously can't be the same
as 192.168.2.4, but if I assign it, for
example: 192.168.3.4 and 192.168.2.4 fails
then, my web server will have an invalid
gateway address, plus I'll have to setup
up redundant access rules and objects

Help

Thanks

cable Team Nic 2 of 2 in Sonic Wall as
a dmz failover.

My guess, is that I would set it up
as


I was
the second physical network

 

[basball]

My guess at this point, is for the 2nd physical connection, Team Nic 2 of 2, simply designate it as a dmz zone and choose:
layer 2 bridge mode and route to x2 (team nic 1 of 2)?