Redhat 9 MRTG Configuration Error

[ramizbsd]

Dears,
I am using a windows xp computer for some applications having ip address 192.168.0.2. I have and other machine Redhat9 on which i want to configure mrtg for windows xp. I configure snmp service on windows xp. when i tried to configure mrtg on RH9 linux for windows snmp, it gave me error message

Configurations are:

i installed
perl-5.8.0-88, gd-1.8.4-11, mrtg-2.9.17-13

then i create a directory /var/

http://www/html/winstat

Now when i run this command
#cfgmaker --global 'WorkDir: /var/

http://www/html/winstat'

--output /var/

http://www/html/winstat.cfg

public@192.168.0.2

I recieved this error message:

--base: Get Device Info on public@192.168.0.2:
SNMP Error:
no response received
SNMPv1_Session (remote host: "192.168.0.2" [192.168.0.2].161)
community: "public"
request ID: 1517974469
PDU bufsize: 8000 bytes
timeout: 2s
retries: 5
backoff: 1)
at /usr/bin/../lib/mrtg2/SNMP_util.pm line 450
SNMPGET Problem for sysDescr sysContact sysName sysLocation sysObjectID on public@192.168.0.2:
at /usr/bin/cfgmaker line 657
--base: Vendor Id:
--base: Populating confcache
--snpo: confcache public@192.168.0.2: Descr -->
--snpo: Skipping ipAdEntIfIndex scanning because public@192.168.0.2: does not seem to support it
--snpo: confcache public@192.168.0.2: Name -->
--snpo: confcache public@192.168.0.2: Type -->
--snpo: Skipping ifPhysAddress scanning because public@192.168.0.2: does not seem to support it
--base: Get Interface Info
--base: Walking ifIndex
SNMP Error:
no response received
SNMPv1_Session (remote host: "192.168.0.2" [192.168.0.2].161)
community: "public"
request ID: 1517974472
PDU bufsize: 8000 bytes
timeout: 2s
retries: 5
backoff: 1)
at /usr/bin/../lib/mrtg2/SNMP_util.pm line 540
SNMPWALK Problem for 1.3.6.1.2.1.2.2.1.1 on public@192.168.0.2:
at /usr/bin/cfgmaker line 107
--base: Walking ifType
SNMP Error:
no response received
SNMPv1_Session (remote host: "192.168.0.2" [192.168.0.2].161)
community: "public"
request ID: 1517974473
PDU bufsize: 8000 bytes
timeout: 2s
retries: 5
backoff: 1)
at /usr/bin/../lib/mrtg2/SNMP_util.pm line 540
SNMPWALK Problem for 1.3.6.1.2.1.2.2.1.3 on public@192.168.0.2:
at /usr/bin/cfgmaker line 107
--base: Walking ifSpeed
SNMP Error:
no response received
SNMPv1_Session (remote host: "192.168.0.2" [192.168.0.2].161)
community: "public"
request ID: 1517974474
PDU bufsize: 8000 bytes
timeout: 2s
retries: 5
backoff: 1)
at /usr/bin/../lib/mrtg2/SNMP_util.pm line 540
SNMPWALK Problem for 1.3.6.1.2.1.2.2.1.5 on public@192.168.0.2:
at /usr/bin/cfgmaker line 107
--base: Walking ifAdminStatus
SNMP Error:
no response received
SNMPv1_Session (remote host: "192.168.0.2" [192.168.0.2].161)
community: "public"
request ID: 1517974475
PDU bufsize: 8000 bytes
timeout: 2s
retries: 5
backoff: 1)
at /usr/bin/../lib/mrtg2/SNMP_util.pm line 540
SNMPWALK Problem for 1.3.6.1.2.1.2.2.1.7 on public@192.168.0.2:
at /usr/bin/cfgmaker line 107
--base: Walking ifOperStatus
SNMP Error:
no response received
SNMPv1_Session (remote host: "192.168.0.2" [192.168.0.2].161)
community: "public"
request ID: 1517974476
PDU bufsize: 8000 bytes
timeout: 2s
retries: 5
backoff: 1)
at /usr/bin/../lib/mrtg2/SNMP_util.pm line 540
SNMPWALK Problem for 1.3.6.1.2.1.2.2.1.8 on public@192.168.0.2:
at /usr/bin/cfgmaker line 107
--base: Writing /var/

http://www/html/winstat.cfg

#
Plz tell me why this error is... SNMP service on windows xp is working fine because i have check it by PRTG software.

Thankz.

Ramiz

 

[pansophic]

Have you run snmpwalk manually to see if it actually runs? Perhaps there is a password required for the public community login?


pansophic