Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Red LED on DLC Card

Status
Not open for further replies.

manswar

Technical User
Oct 19, 2010
72
US
Hi Friends,

I have installed a DLC card and did Cardmlt.

Later on i see that this card is having Red LED glowing all the time on it.

Card stat says it as unequipped.

Could any one say what is going wrong with this DLC card.

Regards.
Pavan

 
I have build a DN on it and i still see RED LED on the DLC

Regards,
pavan
 
I did a stat it shows IDLE for TN 44 0 4 0
 
disable your card and reseat it. Make sure that the light flashes 3 times then goes out once seated properly. If not, your card is probably bad; you could roll it with a known good card to verify.
 
Swap out the card with a known good one and see what you get.
Did you try to connect a test phone right to the new tn coming off your bix block? That would be the first 2 things to try right away.

Jeremy J. Carter
Charm City Communications
Norstar. BCM. CS1000 Programmer
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top