Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Recording / uploading message for disa
- Thread starter PbsCott
- Start date
download goldwave us 16bit codec and it can be done thru bgm 1/8inch tr
If you're not using the built-in ESVM for voicemail, you can upload WAV audio files into the OGM slots using the software. WAV must be 8kHz 16bit mono. Set SVM to OUS, then disable the ESVM. Then use Utility > Message Transfer from PC to PBX. Tell it what slot/OGM to upload into (this can be very slow, be prepared for up to 15mins). Put SVM back INS, and assign your OGM number to the DISA number.
- Status
Similar threads
- Question