Recording new announce to VSU 1

[cuneyt2919]

Hi Does somebody help me which commands should be used to record new announcement? (And after this set this announcement to ACd group) raeqi,radni,ragai ... etc?
In which order should i use this commands?Doeas anybody have a procedure about it?
Thanks for your help
Regards.

Note: i have lots of directory numbers for vsids, but i don't know whether they are used for any purposes

RECORDED ANNOUNCEMENT DIRECTORY NUMBER INFORMATION
VSID DIR CAT
1 68901 0
2 68902 0
3 68903 0
4 68904 0
5 68905 0
6 68906 0
7 68907 0
8 68908 0
9 68909 0
10 68910 0
11 68911 0
12 68912 0
13 68913 0
14 68914 0
15 68915 0
16 68916 0
17 68917 0
18 68918 0
19 68919 0
20 68920 0
21 68921 0
22 68922 0
23 68923 0
24 68924 0
25 68925 0
26 68926 0
27 68927 0
28 68928 0
29 68929 0
30 68930 0
31 68931 0
32 68932 0
33 67899 0

END

 

[lalrl]

so it looks like in our pabx and note: One vsid/dir per card. Your printout means, you would have 33xVSU in your system...

<radnp:vsid=11;
RECORDED ANNOUNCEMENT DIRECTORY NUMBER INFORMATION
VSID DIR CAT
11 1234 17

<raeqp:vsid=13;
RECORDED ANNOUNCEMENT EQUIPMENT
VSID BPOS COMPR
11 1-1-50 NO

<radsp:ann=all;
RECORDED VOICE ANNOUNCEMENT DEVICE SELECTION DATA
ANN VSID EMDEV
1 11
2 11
3 11

<ramdp:ann=all;
RECORDED VOICE ANNOUNCEMENT MESSAGE DATA
ANN MSG EWT
1 22
2 23
3 24

<ragap:grp=all;
GROUP ANNOUCEMENT DATA
GRP WELCOM QUEUE CONT REPQUE CIDREQ EWTA QTIME RTIME
2222 1 2 3

check aspac parnum=161, 307 is a good value

dial 1234, record your messages:
- Recording: 2* msg-number# recording #
- Playing: 1 * msg-number#
- Delete: 3* msg-number#

good luck!