Record Selectors Without Record Number

[Kevsim]

Access 2003, I wish to have the Record Selectors without showing the Record Number.
Is there anyway of doing this?
I would appreciate your advise.
kevsim

 

[TheAceMan1]

How are ya Kevsim . . .

Have a look at the [blue]Navigation Buttons[/blue] properety!

See Ya! . . . . . .

Be sure to see thread181-473997 [blue]Worthy Reading![/blue]
Also faq181-2886 [blue]Worthy Reading![/blue]

 

[Kevsim]

TheAceMan1,
I thank you for the prompt reply.
On the form under Properties "Navigation Buttons" it only states Yes or No.
Is there an other Property I am missing?
I wish to have the butons without the record number.
kevsim

 

[ProgramError]

as far as I am aware, you cannot have the navagation buttons without the record number displayed.
You can, however, create your own navigation buttons if you wish. Put them in the form footer.

Ian Mayor (UK)
Program Error
9 times out of 10 I know what I'm talking about. This must be my tenth reply.

 

[TheAceMan1]

Kevsim . . .

ProgramError is correct. The navigation buttons are an all or nothing affair (including the count). You'll have to make your own. You can find code for the buttons here: thread702-1557046

See Ya! . . . . . .

Be sure to see thread181-473997 [blue]Worthy Reading![/blue]
Also faq181-2886 [blue]Worthy Reading![/blue]

 

[MajP]

One recommendation if you plan to do this more than once. Build a small subform with your buttons especially if you want to get fancy. Now change AceMan's code wherever you see "Me." replace with "Me.Parent." Now you can drop this subform onto any form and it will work.