Recomendation please

[blackjackshellac]

I am running an Option 11 at one site and just had a T1 installed. This is the only T1 in this switch and when I stat it this is what I see just about any time of the day. Now it has been configured to have outbound calls go out of the option 11 and inbound calls come through our main PBX at head office - a 61.

With limited knowledge, I have printed all of the ROUT's and added up the MAX on all of them and I get a total of 20.(2 routs have 10 each) The rest have no such MAX or MIN.

So 2 questions. 1 - If there is no MAX specified, does that mean that only one call at a time can go through that rout? 2 - What would you guys recommend I do because my boss wants to see just about every channel be busy. Needs to know he spent his money wisely



PRI* TRK LOOP 2 - ENBL
FFMT/LCMT/YALMT: ESF/B8Z/FDL
TRACKING
SERVICE RESTORE: YES
YEL ALM PROCESS: YES
ALARM STATUS : NO ALARM
CH 01 - IDLE ISA CH 02 - IDLE ISA
CH 03 - IDLE ISA CH 04 - IDLE ISA
CH 05 - BUSY ISA CH 06 - IDLE ISA
CH 07 - IDLE ISA CH 08 - IDLE ISA
CH 09 - IDLE ISA CH 10 - IDLE ISA
CH 11 - IDLE ISA CH 12 - IDLE ISA
CH 13 - IDLE ISA CH 14 - IDLE ISA
CH 15 - IDLE ISA CH 16 - IDLE ISA
CH 17 - IDLE ISA CH 18 - IDLE ISA
CH 19 - IDLE ISA CH 20 - IDLE ISA
CH 21 - IDLE ISA CH 22 - IDLE ISA
CH 23 - IDLE ISA CH 24 - DCH 14



TYPE RDB
CUST 00
DMOD
ROUT 0
DES ISA_INCOMING
TKTP DID
M911_ANI NO
M911_TONE NO
NPID_TBL_NUM 0
SAT NO
RCLS EXT
VTRK NO
DTRK YES
BRIP NO
DGTP PRI
ISDN YES
MODE PRA
IFC D100
SBN NO
PNI 00001
NCNA YES
NCRD YES
ISAR YES
RTN 50
MIN 0
MAX 10
NCOS 0
CPUB OFF
DAPC NO
BCOT 0
DSEL VOD
PTYP PRI
AUTO NO
DNIS NO
DCDR NO
ICOG ICT
STEP
ACOD 7900
PII NO
TARG 01
CLEN 1
BILN NO
OABS
INST
IDC YES
DCNO 0
NDNO 0 *
DEXT NO
DNAM NO
ICIS YES
TIMR ICF 512
OGF 512
EOD 13952
NRD 10112
DDL 70
ODT 4096
RGV 640
FLH 510
GRD 896
SFB 3
NBS 2048
NBL 4096
IENB 5
VSS 0
VGD 6
DRNG NO
CDR NO
VRAT NO
MUS NO
RACD NO
FRL 0 0
FRL 1 0
FRL 2 0
FRL 3 0
FRL 4 0
FRL 5 0
FRL 6 0
FRL 7 0
OHQ NO
OHQT 00
TTBL 0
ATAN NO
PLEV 2
MCTS NO
ALRM NO
ART 0
SGRP 0
AACR NO

Thanks in advance

 

[johnpoole]

with no max set, outbound can use any vacant channel.. the only reason for min/max is to control a flood of either inbound or outbound calls. the only way your going to see 20 busy trunks if for 20 people to be on the phone all talking to the for end of those routes. as long as isa in in service, a min on the 81 would block x number of routes from the 81 for inbound.. ie if you have 15 usesrs calling the opt 11, min 15 the next call from the 81 would hit a busy, blocking the vacant trunks for inbound... i have never had a reason to use isa between tie's.. let traffic decide which trunks are in use in which direction.. we set min mix on our inbound did group, 230 trunks, that keeps a flood of calls from hitting the hosp and blocking all outbound traffic.. a major accident, school bus, airpalne etc would be the only possible times those params would come into play...

john poole
bellsouth business
columbia,sc