Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

rebuild the mirror

Status
Not open for further replies.
minxca

minxca

Technical User
Apr 25, 2003
576
0
0
CA
Hi,

I have IBM X-335 using Raid 1. I'm going to install FR3 for citrix. One of my friend suggested to me to unplug one hard drive and then install FR3.

Scenario 1: Upgrade run smoothly, plug the second HD and it'll rebuild by itself

Scenario2: Upgrade failed, unplug the first HD and then reboot the server with second HD, plug the first HD and build the mirror from second HD.

Sounds good to me but how? How do I know if it the sync is one way from second to first HD since the first HD is more up to date?

Thanks,
Winoto
 
Status
Not open for further replies.

Similar threads

Sps Pros
  • Question
Replacing the EMC CX3 / CX4
Replies
0
Views
877
Sps Pros
Sps Pros
Sundaramoorthi
  • Locked
  • Question
Issue With "start /SYS" in the SUN Server T5120
Replies
0
Views
230
Sundaramoorthi
Sundaramoorthi
nodlo
  • Locked
  • Question
Reboot causes Rebuild
Replies
0
Views
54
nodlo
nodlo
vincesousa
  • Locked
  • Question
Fractured Mirror
Replies
0
Views
44
vincesousa
vincesousa
Rlemoine
  • Locked
  • Question
LSI Megaraid SAS 9250-4i : allow one disk to be visible by the os ?
Replies
2
Views
106
Rlemoine
Rlemoine

Part and Inventory Search

Sponsor

Back
Top