I just brought down my server (E250 running Sol 7) and added another cpu (exactly the same as the first) and more RAM. When I boot the system it comes up with a ton of errors and as a Read Only file system. I can't start an processes. I can manuver around the directories but it stays in the "white" CLI screen. ANy help is "GREATLY" appreciated!!!!!!!!!!!
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
reboot now file system read only!!!!!!!!!! help!!!!!!!!!
- Thread starter news2me
- Start date
KenCunningham
Technical User
You are doing a boot -r to force recognition of the new hardware? Otherwise, can you give an indication of the type of error being reported?
it sounds like your file system got corrupted. (obviously). for a quick and painless way to get it back, just do a "fsck"
you should be able to get your console into ok promt and single user mode.
just do:
boot -s to get into single user mode from OK promt.
then when the machine boots and you login just type:
fsck, then just let the system fix the file system.
Ive seen this before....stuff happens...lol
\Mike
you should be able to get your console into ok promt and single user mode.
just do:
boot -s to get into single user mode from OK promt.
then when the machine boots and you login just type:
fsck, then just let the system fix the file system.
Ive seen this before....stuff happens...lol
\Mike
- Status
Similar threads
- Locked
- Question