mjwilson12379
IS-IT--Management
- Oct 5, 2003
- 113
Morning (or afternoon for the rest of you).
Have a little problem. 412 at one of our colo facilities (w/ VCM24, dual PRI, running 3.2) and routes traffic to the remote sites over MPLS. All of the sudden, we get an 1639845mS ERR: RealPhysicalMap 13.32 3.29 error IESTA2 80
error and then the calls are not routed correctly, callers cannot hear the called party, and total strangeness occurrs.
Have replaced the 412, VCM and PRI modules already.
I found nothing online about this, has anyone seen this or could possibly point us in the right direction?
Will post or emai config if that might help.
Thanks,
MW
Have a little problem. 412 at one of our colo facilities (w/ VCM24, dual PRI, running 3.2) and routes traffic to the remote sites over MPLS. All of the sudden, we get an 1639845mS ERR: RealPhysicalMap 13.32 3.29 error IESTA2 80
error and then the calls are not routed correctly, callers cannot hear the called party, and total strangeness occurrs.
Have replaced the 412, VCM and PRI modules already.
I found nothing online about this, has anyone seen this or could possibly point us in the right direction?
Will post or emai config if that might help.
Thanks,
MW