Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Realitis Mail

Status
Not open for further replies.

BigSteve1968

Technical User
Feb 12, 2009
22
GB
I started a thread about this card in December. I've now got the cable / V24 box and filter.
Do I just connect via HyperTerminal and if so what baud / parity / stop bits / flow control, etc?
Also, do I need special software or is there a setup menu in HyperTerminal (or whatever software) when connected?

Just want to test a couple of cards we have lying around.
Thanks.

PS. I can program the ISDX-S itself for extensions, trunks, groups, etc so that is not an issue.
 
7-E-1 9600
they use a cli - no menus!
A while since I worked on one, I think they are based on the vmx/octel so if you have programmed one of those or have the manual you should be ok.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top