darbnacnud
Programmer
I have a large binary text file that I need to read from a particular file position. I'm not using Random Access. Is there a way to position the file pointer manually and read the text from that point? Thanks for any input.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Reading a Binary File
- Thread starter darbnacnud
- Start date
- Status
JustinEzequiel
Programmer
from MSDN:
Get Statement
Reads data from an open disk file into a variable.
Syntax
Get [#]filenumber, [recnumber], varname
The Get statement syntax has these parts:
Part Description
filenumber Required. Any valid file number.
recnumber Optional. Variant (Long). Record number (Random mode files) or byte number (Binary mode files) at which reading begins.
varname Required. Valid variable name into which data is read.
Remarks
Data read with Get is usually written to a file with Put.
The first record or byte in a file is at position 1, the second record or byte is at position 2, and so on. If you omit recnumber, the next record or byte following the last Get or Put statement (or pointed to by the last Seek function) is read. You must include delimiting commas, for example:
Get #4,,FileBuffer
For files opened in Random mode, the following rules apply:
If the length of the data being read is less than the length specified in the Len clause of the Open statement, Get reads subsequent records on record-length boundaries. The space between the end of one record and the beginning of the next record is padded with the existing contents of the file buffer. Because the amount of padding data can't be determined with any certainty, it is generally a good idea to have the record length match the length of the data being read.
If the variable being read into is a variable-length string, Get reads a 2-byte descriptor containing the string length and then reads the data that goes into the variable. Therefore, the record length specified by the Len clause in the Open statement must be at least 2 bytes greater than the actual length of the string.
If the variable being read into is a Variant of numeric type, Get reads 2 bytes identifying the VarType of the Variant and then the data that goes into the variable. For example, when reading a Variant of VarType 3, Get reads 6 bytes: 2 bytes identifying the Variant as VarType 3 (Long) and 4 bytes containing the Long data. The record length specified by the Len clause in the Open statement must be at least 2 bytes greater than the actual number of bytes required to store the variable.
Note You can use the Get statement to read a Variant array from disk, but you can't use Get to read a scalar Variant containing an array. You also can't use Get to read objects from disk.
If the variable being read into is a Variant of VarType 8 (String), Get reads 2 bytes identifying the VarType, 2 bytes indicating the length of the string, and then reads the string data. The record length specified by the Len clause in the Open statement must be at least 4 bytes greater than the actual length of the string.
If the variable being read into is a dynamic array, Get reads a descriptor whose length equals 2 plus 8 times the number of dimensions, that is, 2 + 8 * NumberOfDimensions. The record length specified by the Len clause in the Open statement must be greater than or equal to the sum of all the bytes required to read the array data and the array descriptor. For example, the following array declaration requires 118 bytes when the array is written to disk.
Dim MyArray(1 To 5,1 To 10) As Integer
The 118 bytes are distributed as follows: 18 bytes for the descriptor (2 + 8 * 2), and 100 bytes for the data (5 * 10 * 2).
If the variable being read into is a fixed-size array, Get reads only the data. No descriptor is read.
If the variable being read into is any other type of variable (not a variable-length string or a Variant), Get reads only the variable data. The record length specified by the Len clause in the Open statement must be greater than or equal to the length of the data being read.
Get reads elements of user-defined types as if each were being read individually, except that there is no padding between elements. On disk, a dynamic array in a user-defined type (written with Put) is prefixed by a descriptor whose length equals 2 plus 8 times the number of dimensions, that is, 2 + 8 * NumberOfDimensions. The record length specified by the Len clause in the Open statement must be greater than or equal to the sum of all the bytes required to read the individual elements, including any arrays and their descriptors.
For files opened in Binary mode, all of the Random rules apply, except:
The Len clause in the Open statement has no effect. Get reads all variables from disk contiguously; that is, with no padding between records.
For any array other than an array in a user-defined type, Get reads only the data. No descriptor is read.
Get reads variable-length strings that aren't elements of user-defined types without expecting the 2-byte length descriptor. The number of bytes read equals the number of characters already in the string. For example, the following statements read 10 bytes from file number 1:
VarString = String(10," "
Get #1,,VarString
--------------------------------------------------------------------------------
Send feedback to MSDN.Look here for MSDN Online resources.
Get Statement
Reads data from an open disk file into a variable.
Syntax
Get [#]filenumber, [recnumber], varname
The Get statement syntax has these parts:
Part Description
filenumber Required. Any valid file number.
recnumber Optional. Variant (Long). Record number (Random mode files) or byte number (Binary mode files) at which reading begins.
varname Required. Valid variable name into which data is read.
Remarks
Data read with Get is usually written to a file with Put.
The first record or byte in a file is at position 1, the second record or byte is at position 2, and so on. If you omit recnumber, the next record or byte following the last Get or Put statement (or pointed to by the last Seek function) is read. You must include delimiting commas, for example:
Get #4,,FileBuffer
For files opened in Random mode, the following rules apply:
If the length of the data being read is less than the length specified in the Len clause of the Open statement, Get reads subsequent records on record-length boundaries. The space between the end of one record and the beginning of the next record is padded with the existing contents of the file buffer. Because the amount of padding data can't be determined with any certainty, it is generally a good idea to have the record length match the length of the data being read.
If the variable being read into is a variable-length string, Get reads a 2-byte descriptor containing the string length and then reads the data that goes into the variable. Therefore, the record length specified by the Len clause in the Open statement must be at least 2 bytes greater than the actual length of the string.
If the variable being read into is a Variant of numeric type, Get reads 2 bytes identifying the VarType of the Variant and then the data that goes into the variable. For example, when reading a Variant of VarType 3, Get reads 6 bytes: 2 bytes identifying the Variant as VarType 3 (Long) and 4 bytes containing the Long data. The record length specified by the Len clause in the Open statement must be at least 2 bytes greater than the actual number of bytes required to store the variable.
Note You can use the Get statement to read a Variant array from disk, but you can't use Get to read a scalar Variant containing an array. You also can't use Get to read objects from disk.
If the variable being read into is a Variant of VarType 8 (String), Get reads 2 bytes identifying the VarType, 2 bytes indicating the length of the string, and then reads the string data. The record length specified by the Len clause in the Open statement must be at least 4 bytes greater than the actual length of the string.
If the variable being read into is a dynamic array, Get reads a descriptor whose length equals 2 plus 8 times the number of dimensions, that is, 2 + 8 * NumberOfDimensions. The record length specified by the Len clause in the Open statement must be greater than or equal to the sum of all the bytes required to read the array data and the array descriptor. For example, the following array declaration requires 118 bytes when the array is written to disk.
Dim MyArray(1 To 5,1 To 10) As Integer
The 118 bytes are distributed as follows: 18 bytes for the descriptor (2 + 8 * 2), and 100 bytes for the data (5 * 10 * 2).
If the variable being read into is a fixed-size array, Get reads only the data. No descriptor is read.
If the variable being read into is any other type of variable (not a variable-length string or a Variant), Get reads only the variable data. The record length specified by the Len clause in the Open statement must be greater than or equal to the length of the data being read.
Get reads elements of user-defined types as if each were being read individually, except that there is no padding between elements. On disk, a dynamic array in a user-defined type (written with Put) is prefixed by a descriptor whose length equals 2 plus 8 times the number of dimensions, that is, 2 + 8 * NumberOfDimensions. The record length specified by the Len clause in the Open statement must be greater than or equal to the sum of all the bytes required to read the individual elements, including any arrays and their descriptors.
For files opened in Binary mode, all of the Random rules apply, except:
The Len clause in the Open statement has no effect. Get reads all variables from disk contiguously; that is, with no padding between records.
For any array other than an array in a user-defined type, Get reads only the data. No descriptor is read.
Get reads variable-length strings that aren't elements of user-defined types without expecting the 2-byte length descriptor. The number of bytes read equals the number of characters already in the string. For example, the following statements read 10 bytes from file number 1:
VarString = String(10," "
Get #1,,VarString
--------------------------------------------------------------------------------
Send feedback to MSDN.Look here for MSDN Online resources.
- Status
