timdodgson
Technical User
sorry it took this long but i have been on holiday
anyhow check this out
Thanks for your post.
To extract the OPK wizard:
- Open a DOS command box and switch to the \Tools\Admin directory on the OEM CD.
There should be one file in this directory called MKCWRT.EXE
- Enter the following command from the DOS command prompt:
mkcwrt /C:"command.com /C mkcwrt.bat D: C:\Wizard"
Don't leave off the quotes ("
or spaces. D: is your CD-ROM drive letter, change
it if necessary. C:\Wizard is the destination directory for the wizard
this was e mailed to me from microsoft after you do this you have a folder on your hard drive where you can make a startup disk which will pre install windows 98
It is all pretty simple if you have any problem ask
Also go to microsort.com/oem and sign up ther is some good info there
Tim
Tim Dodgson
t_dodgson@yahoo.com
anyhow check this out
Thanks for your post.
To extract the OPK wizard:
- Open a DOS command box and switch to the \Tools\Admin directory on the OEM CD.
There should be one file in this directory called MKCWRT.EXE
- Enter the following command from the DOS command prompt:
mkcwrt /C:"command.com /C mkcwrt.bat D: C:\Wizard"
Don't leave off the quotes ("
or spaces. D: is your CD-ROM drive letter, change it if necessary. C:\Wizard is the destination directory for the wizard
this was e mailed to me from microsoft after you do this you have a folder on your hard drive where you can make a startup disk which will pre install windows 98
It is all pretty simple if you have any problem ask
Also go to microsort.com/oem and sign up ther is some good info there
Tim
Tim Dodgson
t_dodgson@yahoo.com
