Re-initializing CallPilot 150

[msilkapda]

I need to reinitialize a CallPilot 150 in order to change the DN length from 4 to 3 digits.
This CallPilot is provisioned for 300 mailboxes.
Will I lose those installed options once I reinitialize the CallPilot?

 

[Splic3d]

You will need to re-install your key code file(s)as a reinitialize will remove them.

http://www.i3techgroup.com

If its not working, get a bigger hammer!

Avaya/Nortel/NEC/Asterisk/Access Control/CCTV/DSX/Acti/UCx

 

[exsmogger]

Doing a REINSTALL to reset programming to defaults should not affect any installed keycodes. It's always a good idea to have the CallPilot backed up before proceeding.

Brian Cox
Georgia Telephone

http://Georgia-Telephone.com

http://www.linkedin.com/in/briancox1952

 

[msilkapda]

Thank you for the advice.

I performed a backup of the CallPilot and then performed the Reinstall.
Everything worked as expected and the 300 mailboxes were available.

Thanks again!