blackberry1980
Technical User
New to Cisco and would like to know if a cisco 837 router is capable of configuring custom DHCP Scope options and what the commands are ?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Westi on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Re : DHCP Scope options 1
- Thread starter blackberry1980
- Start date
- Status
-
1
- #2
Yes...
router>en
router#conf t
router(config)#ip dhcp pool whatever (name of the pool)
router(dhcp-config)#network x.x.x.x y.y.y.y (ip add and mask of scope)
router(dhcp-config)#default-router x.x.x.x (whatever router interface ip address is serving the dhcp scope)
router(dhcp-config)#?---this "?" gives you whatever other options you need
/
tim@tim-laptop ~ $ sudo apt-get install windows
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Couldn't find package windows...Thank Goodness!
router>en
router#conf t
router(config)#ip dhcp pool whatever (name of the pool)
router(dhcp-config)#network x.x.x.x y.y.y.y (ip add and mask of scope)
router(dhcp-config)#default-router x.x.x.x (whatever router interface ip address is serving the dhcp scope)
router(dhcp-config)#?---this "?" gives you whatever other options you need
/
tim@tim-laptop ~ $ sudo apt-get install windows
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Couldn't find package windows...Thank Goodness!
- Thread starter
- #3
blackberry1980
Technical User
Thank you burstbees for the speedy response. I will have a go at these.
- Status
