New2Nortel
Technical User
I have a BCM 50 at a remote location. During an office remodel a T7316E was unplugged and became inactive. I need to re-active that line. Can anyone assist me in this process?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations biv343 on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Re-Activate T7316E BCM 5.0
- Thread starter New2Nortel
- Start date
- Status
Firebird Scrambler
Systems Engineer
It should re enable when the phone is plugged back in. Check that the phone is OK by plugging it in another working port.
All the best
Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK
If it's working, then leave it alone!.
All the best
Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK
If it's working, then leave it alone!.
- Thread starter
- #3
New2Nortel
Technical User
Thank you it did re-enable. It took longer than origianlly thought but everyone came back online.
- Status
Similar threads
- Locked
- Question
- Locked
- Question