RDAC on non-turbo version of IBM FAStT600

[vaniello]

Does anyone know of a version of RDAC that will run on the non-turbo version of IBM's FAStT600?

V/

 

[aixvato]

The RDAC is based on the OS that you are running on the host. Check the FSM user guides for the platform you are running and you will get the RDAC levels...

File sets required for AIX 5.3 RDAC

PTF file sets Version

devices.fcp.disk.array.diag 5.3.0.0
devices.fcp.disk.array.rte 5.3.0.0
devices.common.IBM.fc.rte 5.3.0.0
devices.pci.df1000f7.com 5.3.0.0
devices.pci.df1000f7.rte 5.3.0.0
devices.pci.df1000f9.rte 5.3.0.0

 

[vaniello]

I am running Linux. From the RDAC README it states that it does not run on the non-turbo version of the FASTt600.

I went ahead and tried using it anyway and it seems to work. Unfortunately, I doubt this configuration will be supported by IBM.

V/

 

[aixvato]

Here is the interop matrix:
www- 1.ibm.com/servers/storage/disk/ds4000/pdf/interop-matrix.pdf

You are correct, if it is not the Linux/hardware platform then IBM will not support....

Thanks

 

[sam99taf]

v 09.00.35.02 is the latest version of RDAC.

As long as you have Storage Manager 9.10, you will have this in the package or download it from

http://www-3.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-50176