rconsole not working

[ataylor44]

For some strange reason we can't access rconsole.I have tried a dsrepair,and that didn't find any errors.We were useing it a couple of weeks ago with no problem.We have a Novell 4.2 server SPA9 and running client 3.1 on the workstations.

 

[TheLad]

Stupid question, have you rebooted?

Another stupid question, is RSPX.NLM loaded after REMOTE.NLM? -----------------------------------------------------
"It's true, its damn true!"
-----------------------------------------------------

 

[ataylor44]

I have rebooted a few different times after dsrepair and yes remote & rspx is loaded.

 

[TheLad]

Does it load from your AUTOEXEC.NCF of is it configured via INETCFG? If INETCFG, try disabling it and then reconfiguring it. Ensure that there are not conflicting entries in the AUTOEXEC.NCF also. -----------------------------------------------------
"It's true, its damn true!"
-----------------------------------------------------

 

[ataylor44]

It is loading from the autoexec.ncf and not the INETCFG.

 

[TheLad]

Try unloading RSPX followed by REMOTE, then loading REMOTE manually followed by RSPX. See if you can then access your server via Rconsole.

If not, post your settings in AUTOEXEC.NCF for this and we'll take a look -----------------------------------------------------
"It's true, its damn true!"
-----------------------------------------------------

 

[ataylor44]

That worked.Don't know why but unloading and reloading in that order made it start working again.Thanks again

 

[TheLad]

Nice! It may be worth checking your settings in AUTOEXEC.NCF then. I always put REMOTE and RSPX as the next commands after the server name and server ID -----------------------------------------------------
"It's true, its damn true!"
-----------------------------------------------------