RC1 ????

[VLG711]

does anyone know what the command RC1 does??
there is no reference in MAN

I got the out-put

The system is coming up for administration. Please wait.
checking ufs filesystems

/dev/md/rdsk/d19: FREE BLK COUNT(S) WRONG IN SUPERBLK (SALVAGED)
/dev/md/rdsk/d19: 2524 files, 628392 used, 2209040 free
/dev/md/rdsk/d19: (1808 frags, 275904 blocks, 0.0% fragmentation)

THE FOLLOWING FILE SYSTEM(S) HAD AN UNEXPECTED INCONSISTENCY: /dev/md/rdsk/d19 /
mount: /dev/md/dsk/d19 is already mounted, /cms is busy,
or the allowable number of mount points has been exceeded


I dont know what this means

Thanks for all help

 

[crowe]

The output you have on the screen is indicating that your system (most likely Sun) is complaining about the root filesystem after a re-boot. The output is produced from fsck, and is basically runing a check aginst the filesystem to make sure all is ok.
The second part is complaining about the meta-device (/dev/md/rdsk/d19) already being in use. You might want to check out the /etc/vfstab file to see if it has a duplicate line in it, or is incorrect in some other fashion.
RC1 is the first run level that the machine goes through when booting.

crowe