RAS Mapped drives

[webjunk]

I was able to dial into the server but I can't get mapped to any drives. I can't even see the server under Network Neighborhood. Any ideas?

Thank you

 

[TheVMan]

I'd first try and ping the box to make sure you can talk to it over the network. Depending on that, you might need to check the DNS/WINS settings in your dial-up connection. Is the box you are dialing in with a Win9X machine or an NT machine? If it is 9X, you will need to make sure you are using a log in name that has permissions to your server.

Good Luck
V

 

[webjunk]

I am using a win9x machine to log onto the server. Here are the RAS settings on my server:
-Stand alone server with IP address 10.1.1.1
-Access to the whole server
-Use static address pool: 10.1.1.2 - 10.1.1.20

On the win9x machine:
- IP address 10.1.1.12

Is there anything that is missing?

Thanks again

 

[italy]

I am using NT4 and when I am click to create new connection and use VPNPPTPM as modem and I am choosing the dial to not microsoft option so when I am click dial I find username and password and domain and there is no place I can put the ip address of the server I have account in and I put it instead of the domain and click dial Error modem deos not pick up the phone .what is wrong with configuration .Urgent please thanks