RAS 1500 ISDN PRI

[Cotton9]

Have several interfaces, pau0/slot:1/mod:1, with an 'admin status' of DOWN.

ras1500> list interface

INTERFACES
Interface Oper Admin
Name Status Status
brd Down Up
rm0/eth:1 Up Up
rm0/wan:1 Up Up
fwire Up Up
internal Up Up
loopback Up Up
pau0/slot:1/mod:1 Down Down <<< this is bad
pau0/slot:1/mod:2 UP Up <<< this is working

(total of 6 of 23 interfaces show admin status of 'down')

Have used 'enable interface pau0/slot:1/mod:1' no error message was returned but the interface is still 'down'.

Does anyone know the corret command to 'admin up' an inteface?

Called local provider and they do not see any channels on the PRI as being blocked or down.

 

[Cotton9]

Called 3COM and they suggested to rebuild the router.

Erased flash and reloaded OS and full re-configure from scratch. All channels back online and functioning.

All is right with the world again.