Range IP Mxone 6

[FabTech]

Hello ,

I need to change the network of an MX-one 6.

I need to change my network to 192.168.0.0/24 in 192.168.0.0/22

I wanted to know if I can just change in "Yast" my subnet / 24 by my new subnet / 22

Or do you have to re-install the MX-ONE and reload the backup?

Thank you for your help

Fabrice

 

[whosrdaddy]

This operation is not supported.
You need to print all data (use file from pcregen) and then reinstall the mx-one and reimport data regenerated from print files.

/Daddy

-----------------------------------------------------
Helping people is my job...

 

[FabTech]

Hello whosrdaddy and thanks for the reply

Why can not I manage the netmask without doing a complete installation again?

What is the risk?

If I modify directly the Linux command

/ Etc / sysconfig / network / ifcfg-eth0

and that I restart the network service

This does not change the files of the Mx-One?

Then I change the netmask for LSU cards?

What is your opinion on the change of the ifcfg-eth0 file?

Mitel has nothing planned if a customer has to change its IP addressing?

thanks for your help

Fabrice

 

[91064]

Hi FabTech,

As whosrdaddy says, this is not supported by Mitel.
As you say it is easy to change on the eth, but all IP´s are copied and inserted in many files within Mx-One.