Hey All,
I have a RAN route that has 2 members in it. For some reason I can only get member 1 to play the second call gets ring back until the first one is done. I have a message recorded on the Interalia on both ports that the trunks terminate to. Not sure what I am missing. Here is my route programing.
TYPE RDB
CUST 00
ROUT 10
DES 1ST RAN
TKTP RAN
NPID_TBL_NUM 0
VTRK NO
NODE
CNDP UKWN
RTYP CK2
GRD PLAY
REP 1
POST DIS
RANH
STRT DDL
WAIT RGB
BDCT YES
TITH 0
NCTH 0
ASUP YES
ACOD 7507
TARG 01
CDR NO
MUS NO
RACD NO
TTBL 0
OHTD NO
ALRM NO
SGRP 0
ARDN NO
CTBL 0
AACR NO
I have a RAN route that has 2 members in it. For some reason I can only get member 1 to play the second call gets ring back until the first one is done. I have a message recorded on the Interalia on both ports that the trunks terminate to. Not sure what I am missing. Here is my route programing.
TYPE RDB
CUST 00
ROUT 10
DES 1ST RAN
TKTP RAN
NPID_TBL_NUM 0
VTRK NO
NODE
CNDP UKWN
RTYP CK2
GRD PLAY
REP 1
POST DIS
RANH
STRT DDL
WAIT RGB
BDCT YES
TITH 0
NCTH 0
ASUP YES
ACOD 7507
TARG 01
CDR NO
MUS NO
RACD NO
TTBL 0
OHTD NO
ALRM NO
SGRP 0
ARDN NO
CTBL 0
AACR NO
