I rebooted AlfaServer DS20 and, received message.
There are Raid Array 3000 whith RAID5.
======================= Binary Error Log event =======================
EVM event name: sys.unix.binlog.hw.scsi
Binary error log events are posted through the binlogd daemon, and
stored in the binary error log file, /var/adm/binary.errlog. This
event is used to report all SCSI device errors, including disk,
tape, HSZ raid events and adapter errors.
Action: Use Compaq Analyze or DECevent to read and analyze the
system error log to determine if a SCSI device may need to be
replaced.
======================================================================
Formatted Message:
SCSI event
Event Data Items:
Event Name : sys.unix.binlog.hw.scsi
Priority : 700
PID : 352
PPID : 1
Event Id : 178
Timestamp : 21-Oct-2003 16:21:31
Host IP address : 100.0.0.200
Host Name : alem05
User Name : root
Format : SCSI event
Reference : cat:evmexp.cat:300
Variable Items:
subid_class (INT32) = 199
subid_num (INT32) = 6
subid_unit_num (INT32) = 392
subid_type (INT32) = 34
binlog_event (OPAQUE) = [OPAQUE VALUE: 1224 bytes]
============================ Translation =============================
Sequence number of error: 1599078430
Time of error entry: 21-Oct-2003 16:21:31
Host name: alem05
SCSI CAM ERROR PACKET
SCSI device class: DEC SIM
Bus Number: 6
Target number: 1
Lun Number: 0
Name of routine that logged the event: ss_perform_timeout
Event information: timeout on disconnected request
############### Entry End ###############
Event information: Active CCB at time of error
############### Entry End ###############
======================================================================
There are Raid Array 3000 whith RAID5.
======================= Binary Error Log event =======================
EVM event name: sys.unix.binlog.hw.scsi
Binary error log events are posted through the binlogd daemon, and
stored in the binary error log file, /var/adm/binary.errlog. This
event is used to report all SCSI device errors, including disk,
tape, HSZ raid events and adapter errors.
Action: Use Compaq Analyze or DECevent to read and analyze the
system error log to determine if a SCSI device may need to be
replaced.
======================================================================
Formatted Message:
SCSI event
Event Data Items:
Event Name : sys.unix.binlog.hw.scsi
Priority : 700
PID : 352
PPID : 1
Event Id : 178
Timestamp : 21-Oct-2003 16:21:31
Host IP address : 100.0.0.200
Host Name : alem05
User Name : root
Format : SCSI event
Reference : cat:evmexp.cat:300
Variable Items:
subid_class (INT32) = 199
subid_num (INT32) = 6
subid_unit_num (INT32) = 392
subid_type (INT32) = 34
binlog_event (OPAQUE) = [OPAQUE VALUE: 1224 bytes]
============================ Translation =============================
Sequence number of error: 1599078430
Time of error entry: 21-Oct-2003 16:21:31
Host name: alem05
SCSI CAM ERROR PACKET
SCSI device class: DEC SIM
Bus Number: 6
Target number: 1
Lun Number: 0
Name of routine that logged the event: ss_perform_timeout
Event information: timeout on disconnected request
############### Entry End ###############
Event information: Active CCB at time of error
############### Entry End ###############
======================================================================