Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

RAID 5 Rebuild 1/2 of the data Missing

Status
Not open for further replies.

gikuyu

IS-IT--Management
Jan 29, 2006
19
KE
Hi, i am hopping this is as fascinating as is to me.

i have a RAID 5 DELL Power edge 6800 SERVER with 3 drives each 300gb making a volume of about 600gb. split into two partitions C: About 20gb" with windows" d: about 500gb " with data and active databases" with almost 400gb of data

i am consulting for the company and this is the information i have in regards to its faliour.

the server RAID filled a few weeks back and the RAID wouldn't rebuild, they called in a Dell consultant who helped them rebuild the RAID.

on the RAID rebuilding the boot partition c; refused to boot so they formatted it and put in a new Windows installation, on booting the windows they realized the d; partition had rebuild but only half of the data previously there is available i.e about 178gb of data is only available the rest is not there.

is there any explanation as to how this may happen
if the rebuilding was done OK, and maybe during the re installation they Run a chkdisk on the volume d; would this cause the loss of data

some of the traces of the missing data being found is mostly data with 0mb in size

there are critical databases missing on the server running on sql 2000, is there a tool to curve our or run a RAW recovery for SQL.

we have run all possible tools r-studio, get data back, data recovery wizard and none of this tools can get the lost data

what explanation exists on this case

how do i get the lost data?

is there a way i could get the windows log files/ event viewer to know what transpired before the faliour, who logged on to the system etc


 
Sounds to me like the rebuild was interrupted...maybe by re-installing Windows? If I had a problem with my RAID array and paid a Dell consultant to rebuild it the first thing I would do would be to image it or otherwise back it up. Speaking of which, where is the backup(s)?

There is no way I know of to determine exactly what transpired at this late date. It would just be guesswork. Have you tried runtime.orgs's RAID reconstructor?

Tony

Users helping Users...
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top