Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

RAID 5 d w/... 1

Status
Not open for further replies.
ikendo

ikendo

MIS
Apr 20, 2001
89
0
0
US
Different speed. Can I use 2 drive thats 10k rpm and other 3 in 7200rpm?
 
Sort by date Sort by votes
Yes you can do this, though the 10K drives will run at 7200.

-------------------------------

If it doesn't leak oil it must be empty!!
 
Upvote 0 Downvote
okay thanks, yep thats what I thought. I guess all RAID setup will take what ever is the lowest.
 
Upvote 0 Downvote
I doubt the 10krpm drives will actually rev down to 7200 rpm, but the controller will divide I/O equally among the drives meaning the 7200 drives will be expected to handle the same load as the 10krpm drives. Performance will not be optimal, but it will work.
/charles
 
Upvote 0 Downvote
Ok, Let me ask you know another question. Say if a ATA100 and ATA133. Which would the RAID will pick? Its gong ATA100?
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

gamer87
  • Locked
  • Question
What best media storage for big files?
Replies
0
Views
50
gamer87
gamer87
Sps Pros
  • Question
How to replace a Dell EqualLogic Controller
Replies
0
Views
228
Sps Pros
Sps Pros
Nyas
  • Locked
  • Question
How to find a VMs (VMware, or Hyper-V) connected to which LUN. ?
Replies
0
Views
123
Nyas
Nyas
Stelios_K
  • Locked
  • Question
SDT9000 f/w
Replies
0
Views
119
Stelios_K
Stelios_K
SrCairo
  • Locked
  • Question
IBM TS3310 - hdd CF in board dead!!!
Replies
1
Views
189
wyman8884
wyman8884

Part and Inventory Search

Sponsor

Back
Top