Radius vpn Problem

[rleestma]

Hi all...

I have a problem...

We have a Firebox 1000 that is using radius to authenticate our users... Whenever we try and connect it starts authenticating but it fails saying the remote computer did not respond...

Here's my log file...

What jumps out at me is where it says "persist flag not set, so we are exiting"

Any thoughts would be appreciated...

Thanks,

Ryan

06/23/04 17:59 tunneld[174]: 16 bytes received from socket 12
06/23/04 17:59 tunneld[174]: recv call-clear-request from XXX.XXX.XXX.XXX
06/23/04 17:59 tunneld[174]: killing child pid 2273
06/23/04 17:59 tunneld[174]: saving channel 172.16.10.5:172.17.0.1 to new fd 12 list
06/23/04 17:59 tunneld[174]: sent call-disconnect-notify
06/23/04 17:59 pptpd[2273]: Terminating on signal 2.
06/23/04 17:59 pptpd[2273]: Connection terminated.
06/23/04 17:59 pptpd[2273]: Persist flag not set, so we are exiting.
06/23/04 17:59 pptpd[2273]: removing socket: /tmp/restart_uds/pptp.2273
06/23/04 17:59 kernel: pptp0: pptp_sock_close
06/23/04 17:59 pptpd[2273]: CHAP will not try to logout user
06/23/04 17:59 pptpd[2273]: Exit.
06/23/04 17:59 tunneld[174]: rcvd SIGCHLD--ignoring
06/23/04 17:59 tunneld[174]: child pid 2273 died
06/23/04 17:59 tunneld[174]: setting channel 172.16.10.5:172.17.0.1 to be re-used
06/23/04 17:59 tunneld[174]: removing XXX.XXX.XXX.XXX from active list
06/23/04 17:59 tunneld[174]: closing fd 12
06/23/04 17:59 tunneld[174]: closing fd 12