RADIUS Authentication issue

[opustwo]

We are authenticating 1200 DSL users onto a 7206 using RadiusNT as the auth server. Users authenticate just fine but when our 7206 has rebooted it takes about 90 minutes for all the users to authenticate back on. Seacrhing the RADIUS log has revealed that the users are being ACK'd sevral times over many minutes until the NAS finally recvognizes the ACK and lets the user on. The CPU is not hi, the mem is fine. The DB server where RadiusNT gets its user info is fairly busy but still reposnding in a respectable time to the requests.

Any ideas what could be going on here?

 

[ashokshabakah]

hai dude

The users will be connected in database table and after that u restart u has to purge the users from the
billing software did u did that r if u r not able to purge try to work out in ur database and try to clear the users from table may be this can be the problem wat type of billing software u r using ......

Ashok

 

[opustwo]

I was told by the techs that the users were cleared when this was happening. We use Emerald.

 

[ashokshabakah]

i dont think sdo the users r purged if it is purged immediately
iot will be ok but it doesnt seems that it works so try to clear interface one by one
it will work soon